C5964 Datasheet, PDF (6/6 Pages) Hamamatsu Corporation – NMOS multichannel detector head

NMOS multichannel detector head C5964 series
s Peripheral equipment for multichannel detectors
Hamamatsu provides a variety of peripheral equipment for NMOS multichannel detectors to facilitate high-precision measurement
using computers. They include a data processing unit, and various interconnection cables. The figure below shows an example
of connections to perihperal equipment, using a PC/AT compatible machine.
OSCILLOSCOPE
SIGNAL CABLE
A3020 (1.5 m, 2 CABLES)
(WITH CONNECTORS
AT BOTH ENDS)
CABLE FOR IMAGE SENSOR
(WITH CONNECTORS
AT BOTH ENDS)
A3017 (0.5 m)
POWER CABLE
(WITH CONNECTORS
AT BOTH ENDS)
A3018 (1.5 m)
HAMAMATSU
POWER SUPPLY (+5 V, ±15 V)
C2892
A7094 (5 m)
A7094-01(2.5 m)
C5964 SERIES
DATA PROCESSING UNIT C6536
INTERFACE BOARD
FOR IMAGE SENSOR
M7089
PC/AT
COMPATIBLE
MACHINE
q Data processing unit C6536
C6536 data processing unit converts video signals from an NMOS
linear image sensor into 12 bit digital signals. C6536 consists of a
driving an image sensor. The signals from the NMOS linear image
sensor are converted into digital signals at high-speed and buffered
in the internal memory. By hand shaking between the internal
controller and the external computer, data can be transferred in
parallel according to the computer's speed.
KACCC0070EA
q Interface board M7089
M7089 interface board is an I/O board designed for IBM PC/AT
compatible computers with an ISA bus slot. By inserting M7089 into
the internal ISA slot of an IBM PC/AT compatible computer, data can
be transferred between C6536 data processing unit and the PC.
This allows analyzing the output signal from an NMOS linear image
sensor on the PC or controlling the signal integration time of the
NMOS linear image sensor from the PC.
q Power supply
This power supply provides an NMOS linear image sensor and a
C6536 data processiong unit with the necessary power of +5 V and
±15 V.
q Interconnection cables
Various interconnection cables are provided for connecting a
multichannel
detector to peripheral units.
s Handling precautions
C5964 series is a precision device, so use sufficient caution when handling it.
q Never disassemble or modify the device as this may cause an operating failure.
q Protect the device from shocks such as drops or impacts as these may cause breakage.
q Avoid storing the device in high temperature and high humidity locations for long periods of time.
q Never block the air vents provided on the top and side panels of this unit during operation. Blocking the air vents may cause
overheating.
q When connecting to other equipment, check that the electrical specifications are matched.
q Never exceed the maximum ratings during operation.
Observe the following precautions to obtain the fullest performance of device.
q Provide a proper shield to protect the device against external electromagnetic effects.
Use of a shield cable is recommended.
q Use a power supply with minimum ripple and noise.
q Pay attention to prevent extraneous light from entering the device for accurate measurements.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2001 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: [phone], Fax: [phone], http://www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: [phone], Fax: [phone]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: [phone], Fax: [phone]
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: [phone], Fax: [phone]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: [phone], Fax: [phone]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: [phone], Fax: [phone]
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: [phone], Fax: [phone]
Cat. No. KACC1018E02
Feb. 2001 DN