C7027 Datasheet, PDF (5/7 Pages) Hamamatsu Corporation – CCD multichannel detector head

CCD multichannel detector head C7027
I Timing chart of area scanning operation
g
g
(
)
Start
CLK
P1V
P2V
TG
P1H
P2H
SG
RG
Clamp
EOS
Trigger
Data Video
BLOCK 1
•••••••••
Start
CLK
P1V
P2V
TG
P1H
P2H
SG
RG
Clamp
EOS
Trigger
Data Video
V-ch1
H-ch1
NOTE) M=128, 256 N=1044
H-ch10 H-ch11
BLOCK M
H-ch (N-10) H-ch (N-9)
H-ch (N)
I Pin connection of "SIGNAL I/O" connector
15-pin D-sub connector
KACCC0161EA
8 7 6 5 4 3 21
15 14 13 12 11 10 9
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Terminal name
Mode select
Data video
VA1+ (+15 V)
VA1- (-15 V)
VD1 (+5 V)
Start
CLK
EOS
A. GND
A. GND
VA2 (+24 V)
D. GND
D. GND
D. GND
Trigger
KACCC0069EA
Description
Digital input signal used to select between the line binning operation and area scanning
operation.
HCMOS compatible.
High level or left open: line binning operation
Low level: area scanning operation
Analog video output. Positive polarity
Analog power supply
Analog power supply
Digital power supply
Digital input signal for initializing the circuit.
HCMOS compatible. Positive logic.
The interval of the Start pulses determines the integration time of the CCD image sensor.
Digital input signal for operating the circuit.
HCMOS compatible. Rising edge operation.
Digital input signal for indicating end-of-scan of the image sensor.
HCMOS compatible. Negative logic.
Analog ground
Analog ground
Analog power supply
Digital ground
Digital ground
Digital ground
Digital output signal for A/D conversion. HCMOS compatible. Positive logic.
5