H11526_15 Datasheet, PDF (4/4 Pages) Hamamatsu Corporation – Metal Package PMT with Gate Function

Photosensor Module with Gate Function H11526 Series
Sensitivity Adjustment Method
Voltage Programming
H11562 SERIES
SMA
SMA
6 PIN
SIGNAL
OUTPUT
GATE PULSE
INPUT (C-MOS)
RED
POWER SUPPLY
+15 V
BLACK
GND
BLUE
Vref OUTPUT
YELLOW
: *1
ERROR MONITOR
OVER-LIGHT MONITOR
: *1
WHITE
GREEN
MODE SELECT SWITCH
*1: Not necessarily used.
+0.4 V to +0.9 V
GND
TPMOC0236EA
Resistance Programming
H11526 SERIES
SMA
SMA
6 PIN
SIGNAL
OUTPUT
GATE PULSE
INPUT (C-MOS)
RED
POWER SUPPLY
+15 V
BLACK
BLUE WHITE
GND
YELLOW
ERROR MONITOR
OVER-LIGHT MONITOR
: *1
GREEN
MODE SELECT
: *1
MONITOR
MIN. +0.4 V
GAIN
10 kΩ ^CONTROL
MAX. +0.9 V
*1: Not necessarily used.
POTENTIOMETER
(RECOMMENDED: 10 kΩ)
When using a potentiometer, adjust sensitivity while monitoring
the control voltage so it does not exceed +0.9 V.
TPMOC0237EA
Dimensional Outlines (Unit: mm)
21
29
29
2-M3 DEPTH 4
20
2 × 3-M2.6 DEPTH 4
100
1: GND
2: LOW VOLTAGE INPUT (+15 V)
3: Vcont INPUT (+0.4 V to +0.9 V)
4: Vref OUTPUT (+1.2 V)
5: ERROR MONITOR / OVER-LIGHT MONITOR
6: OPERATION MODE SELECT INPUT
POWER / CONTROL INPUT
HIROSE HR10A-7R-6PB
EFFECTIVE AREA
( 8 MIN.)
14
4-M2 DEPTH 4
FOR OPTION
0.5
WINDOW
GATE PULSE INPUT
SMA-R
SIGNAL OUTPUT
SMA-R
Power cable with connector (HIROSE HR10A-7P-6S) is supplied with H11526 series
BLACK : GND
RED : LOW VOLTAGE INPUT (+15 V)
WHITE : Vcont INPUT (+0.4 V to +0.9 V)
BLUE : Vref OUTPUT (+1.2 V)
YELLOW : ERROR MONITOR / OVER-LIGHT MONITOR
GREEN : OPERATION MODE SELECT INPUT
450 ± 20
TPMOA0071EA
49