C7884_15 Datasheet, PDF (4/5 Pages) Hamamatsu Corporation – High-precision driver circuits for current-output type NMOS linear image sensor

Driver circuits for NMOS linear image sensor
C7884 series
Pin connections
Pin no.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Terminal name
A.GND
+12 V or +15 V
A.GND
-12 V or -15 V
A.GND
Data Video
A.GND
A.GND
D.GND
EOS
D.GND
Trigger
D.GND
CLK
D.GND
Start
Description
Analog ground
Power supply
Analog ground
Power supply
Analog ground
Analog video signal output; positive polarity
Analog ground
Analog ground
Digital ground
Digital output signal indicating end of scan; negative logic
Digital ground
Digital output signal for A/D conversion; positive logic
Digital ground
Digital input signal for operating the circuit at the rising edge (in case of
C7884G, C7884G-01, output signal)
Digital ground
Digital input signal for initializing the circuit; positive logic. (in case of
C7884G, C7884G-01, output signal)
Interval of these pulses equals the integration time of the sensor.
Dedicated cable A8226
Connector on cable: UFS-16B-01 (made by Yamaichi Electronics)
Connector on board: FAP-16-07#2 (made by Yamaichi Electronics)
Input/output signal connector: BNC (Start, CLK, Trigger, EOS, Data Video)
Power supply: lose wire cable
Cable length: 1 m
C7884G used in combination with A8226
Related information
www.hamamatsu.com/sp/ssd/doc_en.html
Precautions
∙ Notice
4