S9032-02_15 Datasheet, PDF (3/4 Pages) Hamamatsu Corporation – Si photodiode

Si photodiode
S9032-02
Dimensional outline (uint: mm)
Filter
3.2 × 3.2 × 0.75 t
4.1 ± 0.2
(Including burr)
Photosensitive
area
Photosensitive
surface
RB
G
1.5 ± 0.4
4.0*
1.5 ± 0.4
0.7 ± 0.3
7.0 ± 0.3
0.7 ± 0.3
Photosensitive
(2 ×) 10° _surface
(2 ×) 5°
2.0 depth 0.15 max.
0.4
0.8
1.8
Anode (red)
Cathode common
Anode (green)
N/C
Cathode common
Anode (blue)
Tolerance unless otherwise
noted: ±0.1, ±2°
Shaded area indicates burr.
Chip position accuracy with
respect to the package
dimensions marked *
X, Y≤±0.2, θ≤±2°
Lead surface finish: silver plating
Packing: stick (50 pcs/stick)
KSPDA0162EB
Note: If excessive vibration is continuously applied to the glass filter, there is a risk that the filter may come off, so secure the glass fil-
ter with a holder.
Application example
Optical feedback of backlight for TFT-LCD using a color sensor module C9303-04 (integrated with the S9032-02)
C9303-04
Color
controller
Mixing light guide &
LCD panel
Luminance/
light coordinate
setting
Red driver
Green driver
LED LIGHT SOURCE
Blue driver
LED: Made by Lumileds (LUXEON), http://www.lumileds.com/
KACCC0289EA
3