S12571-010C Datasheet, PDF (2/6 Pages) Hamamatsu Corporation – multi-pixel photon counter

MPPC (multi-pixel photon counter)
S12571-010, -015C/P
Structure
Parameter
Effective photosensitive area
Pixel pitch
Number of pixels
Geometrical fill factor
Package
Window
Window refractive index
Symbol
-
-
-
-
-
-
-
-010C
S12571
-010P
-015C
-015P
Unit
1×1
1×1
mm
10
15
μm
10000
4489
-
33
53
%
Ceramic
Surface mount type
Ceramic
Surface mount type -
Silicone resin
Epoxy resin
Silicone resin
Epoxy resin
-
1.41
1.55
1.41
1.55
-
Absolute maximum ratings (Ta=25 °C)
Parameter
Symbol
-010C
S12571
-010P
-015C
-015P
Unit
Operating temperature*¹
Topr
-20 to +40
0 to +40
-20 to +40
0 to +40
°C
Storage temperature*¹
Tstg
-20 to +60
-20 to +60
°C
Reflow soldering conditions*²
Tsol
Peak temperature:
240 °C, twice (see P.5)
Peak temperature:
240 °C, twice (see P.5)
-
Soldering conditions
-
350 °C max.
once, 3 s max.*³
-
350 °C max.
once, 3 s max.*³
-
-
*1: No condensation
*2: JEDEC level 5a
*3: At least 1 mm away from lead root
Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the
product within the absolute maximum ratings.
Electrical and optical characteristics (Ta=25 °C, unless otherwise noted)
Parameter
Symbol
-010C
S12571
-010P
-015C
-015P
Spectral response range
λ
320 to 900
320 to 900
Peak sensitivity wavelength
λp
470
460
Photon detection efficiency
(λ=λp)*⁴
PDE
10
25
Dark count*⁵
Typ.
-
100
100
Max.
200
200
Time resolution (FWHM)*⁶
-
300
250
Terminal capacitance
Gain
Gain temperature coefficient
Breakdown voltage
Ct
M
ΔTＭ
VBR
35
1.35 × 10⁵
1.6 × 10³
65 ± 10
35
2.3 × 10⁵
3.5 × 10³
65 ± 10
Recommended operating voltage Vop
VBR + 4.5
VBR + 4.0
Temperature coefficient of
recommended operating voltage
ΔTVop
60
60
*4: Photon detection efficiency does not include crosstalk or afterpulses.
*5: Threshold=0.5 p.e.
*6: Single photon level
Note: The above characteristics were measured the operating voltage that yields the gain listed in this catalog.
(Refer to the data attached to each product.)
The last letter of each type number indicates the package type (C: ceramic, P: surface mount type).
Unit
nm
nm
%
kcps
ps
pF
-
V
V
V
mV/°C
2