L11754_15 Datasheet, PDF (2/2 Pages) Hamamatsu Corporation – HIGH POWER PHOTOIONIZER

DIMENSIONAL OUTLINES (Unit: mm)
G HEAD: L11755
120
7.5
2-M4 EFFECTIVE DEPTH 8
20
110
180.8
5
19.5
65
65
20 40
40
2-M5 (for ONE TOUCH FITTING)
7-M4 EFFECTIVE DEPTH 10
G CONTROLLER: C11756
200
POWER
ON
OFF
High Penetrative PhotoIonizer
F1
ON
F2
ION
ENT
OFF
FRONT VIEW
Control Cable: A10885 (20 mm)
34.5
100
3
216
21
174
SIDE VIEW
8.8
4-M3
ACCESSORY
HEAD
AC IN
44
93.5
26.5
REAR VIEW
TAPPA0098EA
TAPPA0099EA
! SAFETY PRECAUTIONS
• Soft X-rays emitted from this product are harmful to human health. Take adequate precautions to avoid X-ray exposure.
• When using this product, always install the head inside an X-ray shielded cabinet or other shielded location with utilizing safety interlock mechanism.
! PRECAUTIONS TO USE
• These products are high precision device. Handle it carefully so as not to apply shocks and vibrations.
• The internal ion generator (soft X-ray tube) is a vacuum tube consisting of a glass envelope that may crack or rupture if subjected to shock. Do
not apply strong shocks or vibrations to these products.
• These products were designed for natural air cooling. Do not install it inside a small, air-tight container or locations where the generated heat
cannot dissipate.
• To install the head, always use the mounting screw holes in the metal base on the bottom of the head.
• If these products does not operate correctly, turn the power off and check the cable connections. Then turn the power on again and recheck
operation. If still inoperative then this product might be defective. Contact us for proper handling or repair.
LEGAL REGULATIONS INVOLVING THIS PRODUCT
These products must be used in compliance with health and safety regulations enforced to prevent the bodily harm caused by ionizing radiation.
Users of these products must be familiar with the applicable laws that regulate use of X-ray emission devices. For more details, refer to interna-
tional or domestic laws and regulations on ionizing radiation and comply with the required procedures listed there.
WARRANTY PERIOD
These device are guaranteed for one year from date of delivery.
The warranty extends only to replacement of the products. The warranty does not cover damage due to misuse or natural calamity.
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2012 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K. ^{www.hamamatsu.com}
HAMAMATSU PHOTONICS K.K., Electron Tube Division
314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: [phone], Fax: [phone]
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: [phone], Fax: [phone] E-mail: [e-mail]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: [phone], Fax: [phone] E-mail: [e-mail]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: [phone], Fax: [phone] E-mail: [e-mail]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: [phone], Fax: [phone] E-mail: [e-mail]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: [phone], Fax: [phone] E-mail: [e-mail]
Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: [phone], Fax: [phone] E-mail: [e-mail]
TAPP1075E01
China: HAMAMATSU PHOTONICS (CHINA) Co., Ltd.: 1201 Tower B, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: [phone], Fax: [phone] E-mail: [e-mail] APR. 2012 IP