L10663-01 Datasheet, PDF (2/3 Pages) Hamamatsu Corporation – Transmitter/Receiver photo IC for optical link 3.3 V operation, for MOST automotive network

Transmitter/receiver photo IC for optical link L10663-01, S10664-01
S10664-01
s Electrical and optical characteristics (Ta= -40 to +105 °C, Vcc=3.135 to 3.465 V *⁵)
Parameter
Symbol
Condition
Min.
Typ.
Max.
Unit
Current consumption (operation mode)
Icco *⁶
-
-
24
mA
Current consumption (sleeping mode)
Iccs Dark state
-
-
15
µA
Receiver level
Popt3 Bi-phase signal
-25
-
-2
dBm
High level output voltage
Voh Ioh= -150 µm
2.5
-
Vcc+0.3
V
Vout
Low level output voltage
Rise time
Fall time
Vol Iol=1.0 mA
tr
tf
10 to 90 % *^6, *⁷
0
-
0.4
V
-
-
-
-
9
7
ns
Pulse width variation
tpwv *^6, *^7, *^8, *⁹
17.09
-
29.79
ns
Pulse width distortion (average value)
tapwd *^6, *^7, *^8, *⁹
-2.69
-
+6.49
ns
O peration to sleeping m ode transition receivable level Psl *^6, *¹⁰
S leeping m ode to operation transition receivable level Pop
-39
-
-25.5
dBm
Mode High level voltage
Vmh Imh= -20 µA
2.5
-
-
V
output Low level voltage
Vml Iml=0.3 mA
-
-
0.5
V
*5: A bypass capacitor (0.1 µF) is connected between Vcc and GND at a position within 3 mm from the lead, and a 10 µF
capacitor is also connected to the power supply line nearby.
The center of the optical fiber is aligned with the center of the package lens.
The distance between the fiber end and the lens top is 0.1 mm.
*6: Measured with input signals conforming to SP3 MOST specification of physical layer Rev 1.1 Addendum B.
*7: Measured with RL=50 kΩ, CL=15 pF (including parasitic capacitance such as probe, connector and evaluation circuit board
pattern), and threshold voltage 1.5 V.
*8: An optical input waveform is generated with a Hamamatsu standard transmitter.
*9: Measured with BiPhase PRBS at 45.2 Mbps (NRZ signal conversion).
*10: Average optical output is measured with a POF (NA=0.5).
Note) If modulated light at 4 Mbps or less (including DC light and no light input) is input to S10664-01, the high and low levels
cannot be discerned.
s Mode output waveform (S10664-01)
OPTICAL INPUT
MODE OUTPUT
OUTPUT VOLTAGE
INPUT SIGNAL DATA
tso
NO INPUT SIGNAL
tos
Vmh
Vml
Voh
OUTPUT DATA
Vol
KPICC0095EA
s Output waveform example (S10664-01)
1.5 V
GND
tpwv (min.)
tpwv (max.)
trigger point
Vertical axis: 1 V/div., Horizontal axis: 5 ns/div.
(Ta=25 °C, Vcc=3.465 V, Pi= -26 dBm,
RL=50 kΩ, CL=15 pF, 45.2 Mbps)
2