L10063-01 Datasheet, PDF (2/2 Pages) Hamamatsu Corporation – Transmitter/Receiver photo IC for optical link For MOST automotive network, 50 Mbps band POF communications

Transmitter/receiver photo IC for optical link L10063-01, S10064-01
s Mode output waveform
s Output waveform example
OPTICAL INPUT
MODE OUTPUT
INPUT SIGNAL DATA
tso
NO INPUT SIGNAL
tos
Vmh
Vml
OUTPUT VOLTAGE
Voh
OUTPUT DATA
Vol
KPICC0095EA
Vertical axis: 1 V/div., Horizontal axis: 5 ns/div.
(Ta=25 °C, Vcc=5.25 V, Pi= -26 dBm,
RL=50 kΩ, CL=15 pF, 45.2 Mbps)
L10063-01
s Electrical and optical characteristics (Ta= -40 to +105 °C, Vcc= 4.75 to 5.25 V *⁷)
Parameter
Symbol
Condition
Min.
Typ.
Max.
Unit
Current consumption
Icc Vin= 2.0 V, Rcont=13.5 kΩ
-
-
40
mA
Peak emission wavelength
λp
630
650
670
nm
Spectral half width (FWHM)
Fiber coupled optical output 1
Fiber coupled optical output 2
∆λ
Po1 Rcont=13.5 kΩ *^8, *⁹
Po2 Rcont=27 kΩ *^8, *⁹
-
20
-9
-
-12.5
-
30
nm
-2
dBm
-4.5
dBm
Extinction ratio
re
10
-
-
dB
Rise time at pulse drive
tr
20 to 80 % *⁸
-
-
6.0
ns
Fall time at pulse drive
tf
80 to 20 % *⁸
-
-
6.0
ns
Pulse width variation
tpwv 50 % *^8, *¹⁰
19.99
-
24.29
ns
Pulse width distortion (average value)
tapwd 50 % *^8, *¹⁰
-1.39
-
+1.39
ns
*7: A bypass capacitor (0.1 µF) connected between Vcc and GND at a position within 3 mm from the lead, and a 10 µF capacitor
is also connected to the power supply line nearby.
The center of the optical fiber is aligned with the center of the package lens.
The distance between the fiber end and the lens top is 0.1 mm.
*8: Measured with input signals conforming to SP1 MOST specification of physical layer Rev 1.1 Addendum B.
*9: Average value measured with a plastic fiber (φ1 mm, SI-POF, NA=0.5, 1 m) made by Mitsubishi Rayon.
*10: Measured with BiPhase PRBS at 45.2 Mbps (NRZ signal conversion).
s Dimensional outlines (unit: mm)
L10063-01
S10064-01
(2 ×) d = 0.8 ± 0.05
5.92
2.94
8.98 ± 0.2 (INCLUDING BURR)
7.2 ± 0.2 (INCLUDING BURR)
2.03 EMITTING POINT
8.98 ± 0.2 (INCLUDING BURR)
7.2 ± 0.2 (INCLUDING BURR)
ACTIVE
AREA 2.03
5.92
2.94
(2 ×) d = 0.8 ± 0.05
2.72
1.57
0.97
0.6
a
a’
a’
a’
1.07
1.07
1.27
1.27
(4 ×) 0.5 ± 0.05
(4 ×) 0.5 ± 0.05
2.0 DEPTH 0.15 MAX.
2.54 2.54 2.54
(SPECIFIED AT THE LEAD ROOT)
2.54 2.54 2.54
(SPECIFIED AT THE LEAD ROOT)
0.23
0.05
+
-
0.05
0.03
Tolerance unless otherwise
noted: ±0.1, ±2˚
R0.3 MAX.
Values in parentheses indicate
reference value.
Lead surface finish: Pd plating
Shaded area indicates burr.
(4 ×) 0.25 ± 0.05
Pin No. L10063-01 S10064-01
VIN
Vcc
GND
GND
Vcc MODEOUT
Cont
Vout
a-a’ CROSS SECTION
KPICA0067EA
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: [phone], Fax: [phone], www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: [phone], Fax: [phone]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: [phone], Fax: [phone]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: [phone], Fax: [phone]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: [phone], Fax: [phone]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: [phone], Fax: [phone]
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: [phone], Fax: [phone]
Cat. No. KPIC1065E01
2
May 2007 DN