H11462_15 Datasheet, PDF (2/2 Pages) Hamamatsu Corporation – Side-on PMT

Voltage Output Type Photosensor Modules
Characteristics (Anode radiant sensitivity, PMT gain)
H11462-011
TPMOB0238EA
-021 ¹⁰
-031
PMT GAIN: 10⁵ H11462-012
1
-022
-031/-032
-032
TPMOB0239EA
10⁸
-021/-022
1
0.1
-011/-012
10⁷
-021/-022
10⁶
-011/-012
0.1
0.01
10⁵
-031/-032
0.01
0.001
100 200 300 400 500 600 700 800 900
WAVELENGTH (nm)
10⁴
0.5
0.6
0.7 0.8 0.9 1.0 1.1 1.2
CONTROL VOLTAGE (V)
Sensitivity Adjustment Method
VOLTAGE PROGRAMMING
PHOTOSENSOR MODULE
SIGNAL OUTPUT
LOW VOLTAGE INPUT (RED)
LOW VOLTAGE INPUT (GREEN)
GND (BLACK)
Vref OUTPUT (BLUE)
Vcont INPUT (WHITE)
POWER SUPPLY
+5 V
-5 V
GND
RESISTANCE PROGRAMMING
PHOTOSENSOR MODULE
SIGNAL OUTPUT
LOW VOLTAGE INPUT (RED)
LOW VOLTAGE INPUT (GREEN)
GND (BLACK)
Vref OUTPUT (BLUE)
Vcont INPUT (WHITE)
POWER SUPPLY
+5 V
-5 V
GND
• Adjust the control voltage to
adjust the sensitivity.
• Electrically insulate the
reference voltage output.
+0.5 V to
+1.1 V
GND
MONITOR
POTENTIOMETER (10 kΩ)
When using a potentiometer, adjust sensitivity while monitoring
the control voltage so it does not exceed +1.2 V.
TPMOC0239EA
Dimensional Outlines (Unit: mm)
38.0 ± 0.5
R3
27.0 ± 0.5
EFFECTIVE
AREA
(4 × 20)
50.0 ± 0.5
10.0 ± 0.5
MAX. 10
DETAILS OF INPUT WINDOW
2.5
+1.0
-0
1.5
+0.5
-0
WINDOW
EFFECTIVE
AREA
(4 × 20)
8.0 ± 0.5
MOUNTING
THREADED HOLE
(4-M3 DEPTH: 10)
C1
MOUNTING THREADED HOLE
(2 × 2-M3 DEPTH: 10)
FRONT VIEW
SIDE VIEW
REAR VIEW
LOW VOLTAGE INPUT (+5 V) : AWG26 (RED)
LOW VOLTAGE INPUT (-5 V) : AWG26 (GREEN)
GND
: AWG26 (BLACK)
Vref OUTPUT (+1.2 V)
: AWG26 (BLUE)
Vcont INPUT (+0.5 V to +1.1 V) : AWG26 (WHITE)
SIGNAL OUTPUT
: RG-174/U
TPMOA0073EA
8
WINDOW
PHOTOCATHODE
TPMOC0123EC
39