C8940 Datasheet, PDF (2/5 Pages) Hamamatsu Corporation – PCI board for CCD multichannel detector head

Interface board C8940 series
˙ Specifications
Parameter
C8940
C8940-01
Image
Interface for CCD
multichannel detector head
RS-422
LVDS (RS-644)
input
Sampling frequency
30 MHz Max.
AD conversion resolution
32-bit Max. *¹
External input (BNC)
TTL level input *²
Trigger
Interface output for CCD
multichannel detector head
Trigger generator, output of external input trigger to camera, output logic setting *³
Frame memory
2 M Byte × 2 Bank
Serial interface
16C550ɺRS-232 level
DI/O
DI × 1 bitɺDO × 3 bit *³
DO × 2 bit on A9414 (expansion panel) side output
Frame rate measurement
2 s/frame Max.
Interruption
1 level
End of image data acquisition, end of frame rate measurement, serial interface
BUS I/F
Comforms to PCI bus I/F Ver. 2.1 (PCI controller: PCI9080)
5 V, 32-bit card
Occupation slot
1 slot
When A9414 (extended panel) is used: 2 slots
Supply voltage
DC+5 V / Approx. 700 mA
Storage temperature
-20 to 70 °C
Operating temperature *⁴
0 to 50 °C
Dimensions
175.63 × 106.68 mm (PCI short card size)
Weight
Approx. 163 g
Compatible camera
Hamamatsu multichannel detector head (C8677/C9047/C9265 series)
*1: 16-bit output from C8940 series panel connector: 32-bit output from C8940 series panel when A9414 (extended panel) is added.
*2: Operation up to specified number of frames from trigger edge, one frame operation from trigger edge, operation between
trigger levels, and input logic setting are possible.
*3: C8940: RS-422, C8940-01: LVDS
*4: Dust, corrosive gas, no condensation
s Configuration diagram
CCD MULTICHANNEL
DETECTOR HEAD
I/F
TRIGGER
IN
ON BOARD CN
RS422
(LVDS)
Dr/Rv
FRAME BUFFER
RS232C
Dr/Rv
TTL
16C550
BOARD CONTROL
ADDRESS DECODE
PCI CONTROLLER
PCI9080
PCI BUS
KACCC0209EA
2