H10515B_15 Datasheet, PDF (10/12 Pages) Hamamatsu Corporation – LINEAR ARRAY MULTIANODE PMT ASSEMBLIES AND MODULES

LINEAR ARRAY MULTIANODE
PMT ASSEMBLIES AND MODULES
Figure 9: Sensitivity Adjustment Method
H11451 / H11452
VOLTAGE PROGRAMMING
PMT MODULE
LOW VOLTAGE INPUT (RED)
GND (BLACK)
LOW VOLTAGE INPUT (GREEN)
Vcont INPUT (WHITE)
Vref OUTPUT (BLUE)
GND (BLACK)
SIGNAL OUTPUT
SOCKET: EHF-108-01-F-D-RA
• Adjust the control voltage to adjust
the sensitivity.
• Electrically insulate the reference
voltage output.
POWER SUPPLY
+11.5 V to +15.5 V
GND
-11.5 V to -15.5 V
+2.0 V to
+4.0 V
GND
RESISTANCE PROGRAMMING
PMT MODULE
LOW VOLTAGE INPUT (RED)
GND (BLACK)
LOW VOLTAGE INPUT (GREEN)
Vcont INPUT (WHITE)
Vref OUTPUT (BLUE)
GND (BLACK)
SIGNAL OUTPUT
SOCKET: EHF-108-01-F-D-RA
MONITOR
H11459 / H11460
VOLTAGE PROGRAMMING
PMT MODULE
LOW VOLTAGE INPUT (RED)
GND (BLACK)
LOW VOLTAGE INPUT (GREEN)
Vcont INPUT (WHITE)
Vref OUTPUT (BLUE)
GND (BLACK)
SIGNAL OUTPUT
SOCKET: EHF-117-01-F-D-RA
(samtec)
• Adjust the control voltage to adjust
the sensitivity.
• Electrically insulate the reference
voltage output.
POWER SUPPLY
+11.5 V to +15.5 V
GND
-11.5 V to -15.5 V
+2.0 V to
+3.2 V
GND
RESISTANCE PROGRAMMING
PMT MODULE
LOW VOLTAGE INPUT (RED)
GND (BLACK)
LOW VOLTAGE INPUT (GREEN)
Vcont INPUT (WHITE)
Vref OUTPUT (BLUE)
GND (BLACK)
SIGNAL OUTPUT
SOCKET: EHF-117-01-F-D-RA
(samtec)
MONITOR
Figure 10: Dimensional Outline (Unit: mm)
H11451
0.5
4- 2.4
POWER SUPPLY
+11.5 V to +15.5 V
GND
-11.5 V to -15.5 V
*1: When using a potentiometer to
adjust sensitivity, monitor the
control voltage so that it does
not exceed +4.8 V.
POTENTIOMETER ^*1
(100 kΩ Max.)
TPMHC0241EA
POWER SUPPLY
+11.5 V to +15.5 V
GND
-11.5 V to -15.5 V
*1: When using a potentiometer to
adjust sensitivity, monitor the
control voltage so that it does
not exceed +3.6 V.
POTENTIOMETER ^*1
(100 kΩ Max.)
TPMHC0242EA
MOUNTING
THREADED
HOLE
(4-M2)
EFFECTIVE AREA
(2.5 × 2.0 × 8 CH)
53
PHOTOCATHODE
1
46
TOP VIEW
PHOTOCATHODE
OUTPUT CONNECTOR (Samtec: EHF-108-01-F-D-RA)
15 13 11 9 7 5 3 1
16 14 12 10 8 6 4 2
CH1: PIN16
CH2: PIN14
CH3: PIN12
CH4: PIN10
CH5: PIN8
CH6: PIN6
CH7: PIN4
CH8: PIN2
GND: PIN1, 3, 5, 7, 9, 11, 13, 15
INPUT CONNECTOR
70553-0005 (Molex)
OUTPUT CONNECTOR
EHF-108-01-F-D-RA (Samtec)
INPUT CONNECTOR (Molex: 70553-0005)
PIN1 – CONTROL GND
PIN2 – Vref OUTPUT (+5 V)
PIN3 – Vcont INPUT (+4.8 V Max.)
PIN4 – LOW VOLTAGE INPUT (-11.5 V to -15.5 V)
PIN5 – POWER GND
PIN6 – LOW VOLTAGE INPUT (+11.5 V to +15.5 V)
17.4 ± 0.2
FRONT VIEW
20.5 ± 0.2
75
SIDE VIEW
65
REAR VIEW
654321
POWER CABLE (SUPPLIED)
RIBBON CABLE (SUPPLIED)
500
(Molex: 50-57-9406)
500
(Samtec: FFSD-08-D-20.00-01-N)
TPMHA0567EA