S8984-02_15 Datasheet, PDF (1/3 Pages) Hamamatsu Corporation – Front-illuminated FFT-CCD for X-ray imaging

CCD area image sensor
S8984-02
Front-illuminated FFT-CCD for X-ray imaging
The S8984-02 is an FFT-CCD image sensor suitable for X-ray imaging. The user can use the S8984-02 as an X-ray image
sensor by attaching a desired scintillator film to the faceplate. The S8984-02 is a variant of the S8984 and uses a FOP (fiber
optic plate) as the faceplate instead of a FOS (fiber optic plate with scintillator). The thickness of the FOP was also changed
from 1.5 mm to 10 mm, in order to increase resistance to X-ray irradiation.
Features
X-ray monitoring photodiode incorporated
High dynamic range: 12-bit
Long-term stability
1700 (H) × 1200 (V) pixel format
Pixel size: 20 × 20 μm
Coupled with FOP for X-ray imaging
100% fill factor
Low dark signal
Low readout noise
MPP operation
AC/DC X-ray source adapted
Applications
General X-ray imaging
Non-destructive inspection
Structure
Parameter
CCD structure
Fill factor
Cooling
Number of total pixels
Number of effective pixels
Pixel size
Image size
Vertical clock phase
Horizontal clock phase
Output circuit
Dimensional outline
Window
Other
S8984-02
Full frame transfer
100%
Non-cooled
1708 (H) × 1202 (V)
1700 (H) × 1200 (V)
20 (H) × 20 (V) μm
34 (H) × 24 (V) mm
2-phase
2-phase
Emitter follower without load resistance
39.5 (H) × 27.5 (V) mm
FOP (fiber optic plate)
MPP mode (low dark current operation)
www.hamamatsu.com
1