S7199-01 Datasheet, PDF (1/7 Pages) Hamamatsu Corporation – CCD area image sensor Front-illuminated FFT-CCDs for X-ray imaging

IMAGE SENSOR
CCD area image sensor
S7199-01
Front-illuminated FFT-CCDs for X-ray imaging
S7199-01 is a family of FFT-CCD image sensors specifically designed for X-ray imaging. FOS (Fiber Optic plate with Scintillator)
that converts X-ray into visible-light is mounted on a CCD chip, which enables S7199-01 to acquire the X-ray imaging. Two CCD
chips of symmetric from side to side are mounted closely for realizing the possible minimum dead space in between. The effective
photosensitive length of about 150 mm in total is realized; each chip has 1536 × 128 channels, and 48 × 48 µm is a pixel size.
Even a X-ray image of moving object can be taken by taking a unique operation method of TDI, which can also be useful for a
non-destructive inspection where the object moves on a belt conveyer.
The each chip of S7199-01 has an effective pixel size of 48 × 48 µm and is available in active area of 73.728 (H) × 6.144 (V) mm².
S7199-01 is pin compatible with S7199. (Operating condition is a little bit changed from S7199)
Features
l 1536 (H) × 128 (V) pixel format
l Pixel size: 48 × 48 µm
l Buttable structure of 2 chips
l Coupled with FOS for X-ray imaging
l TDI (Time Delay Integration) operation
l 100 % fill factor
l Wide dynamic range
l Low dark signal
l Low readout noise
l MPP operation
Applications
l General X-ray imaging
l Non-destructive inspection
l Dental panorama
s Selection guide
Type No.
Cooling
S7199-01
Non-cooled
Note) As an input window, FOS is suited to S7199-01.
Number of
total pixels
1536 × 128
Number of
active pixels
1536 × 128
Active area
[mm (H) × mm(V)]
73.728 × 6.144
s General ratings
Parameter
CCD structure
Fill factor
Number of active pixels
Pixel size
CCD active area
X-ray sensitive area
Vertical clock phase
Horizontal clock phase
Output circuit
X-ray resolution
Reliability
Package
Window
*1: Number of active pixels per chip. Two chips are used.
Specification
Full frame transfer or TDI
100 %
1536 (H) × 128 (V) *¹
48 (H) × 48 (V) µm
73.728 (H) × 6.144 (V) mm *¹
146 × 6 mm
2 phase
2 phase
Two-stage MOSFET source follower with load resistance
4 to 6 Lp/mm at 60 kVp, 10 m Roentgen
100,000 shots at 60 kVp, 10 m Roentgen
40 pin ceramic package
FOS (Fiber Optic plate with Scintillator)
1