S7183_15 Datasheet, PDF (1/8 Pages) Hamamatsu Corporation – Photo IC diodes

Photo IC diodes
S7183
S7184
Linear current amplification of photodiode
output
The S7183 and S7184 consist of a photodiode and a signal processing circuit for amplifying the photocurrent generated
from the photodiode up to 1300 times. Despite a small active area, these photo ICs provide an output nearly equal to that
from photodiodes with a 20 × 20 mm active area. Both S7183 and S7184 can be used the same way as a reverse-biased
photodiode, and in most cases, they deliver a sufficient output voltage by just connecting a load resistor.
Features
Applications
Clear plastic package
Operation just as easy as using photodiodes
Large output current rivaling that of a phototransistor
Good linearity
Energy saving sensors for TV brightness controls, etc.
Light dimmers for liquid crystal panels
Various types of light level measurement
Absolute maximum ratings (Ta=25 °C)
Parameter
Symbol
Condition
Value
Unit
Reverse voltage
VR
-0.5 to +16
V
Photocurrent
IL
10
mA
Forward current
IF
10
mA
Power dissipation*¹
P
250
mW
Operating temperature
Topr No dew condensation*²
-30 to +80
°C
Storage temperature
Tstg No dew condensation*²
-40 to +85
°C
Soldering
S7183
S7184
-
260 °C, 3 s, at least 2.5 mm away from package surface
-
350 °C, 3 s
-
Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the
product within the absolute maximum ratings.
*1: Power dissipation decreases at a rate of 3.3 mW/°C above Ta=25 °C
*2: When there is a temperature difference between a product and the surrounding area in high humidity environment, dew
condensation may occur on the product surface. Dew condensation on the product may cause deterioration in characteristics and
reliability.
Electrical and optical characteristics (Ta=25 °C)
Parameter
Symbol
Condition
Min.
Typ.
Max.
Unit
Spectral response range
λ
-
300 to 1000
-
nm
Peak sensitivity wavelength
λp
-
650
-
nm
Operating reverse voltage
VR
3
-
12
V
Dark current
ID
VR=5 V
-
0.5
10
nA
Photocurrent
Rise/fall times
IL
VR=5 V S7183, 100 lx
2856 K S7184, 1000 _lx
0.75
1.4
1.0
1.8
1.25
2.2
mA
10 to 90%,*³
tr, tf VR=5 V, RL=10 kΩ
-
0.6
-
ms
λ=660 nm
*3: Rise/fall time measurement method: Refer to P.2.
These products do not support lead-free soldering. For details on reflow soldering conditions for surface mount types, please contact
our sales office.
www.hamamatsu.com
1