S7030-0906_15 Datasheet, PDF (1/12 Pages) Hamamatsu Corporation – CCD area image sensor

CCD area image sensor
S7030/S7031 series
Back-thinned FFT-CCD
The S7030/S7031 series is a family of FFT-CCD image sensors specifically designed for low-light-level detection in scientific
applications. By using the binning operation, the S7030/S7031 series can be used as a linear image sensor having a long
aperture in the direction of the device length. This makes the S7030/S7031 series suited for use in spectrophotometry. The
binning operation offers significant improvement in S/N and signal processing speed compared with conventional methods by
which signals are digitally added by an external circuit. The S7030/S7031 series also features low noise and low dark signal (MPP
mode operation). This enables low-light-level detection and long integration time, thus achieving a wide dynamic range.
The S7030/S7031 series has an effective pixel size of 24 × 24 μm and is available in image areas ranging from 12.288 (H)
× 1.392 (V) mm² (512 × 58 pixels) up to a large image area of 24.576 (H) × 2.928 (V) mm² (1024 × 250 pixels).
Features
Non-cooled type: S7030 series
One-stage TE-cooled type: S7031 series
Pixel size: 24 × 24 μm
Line, pixel binning
Greater than 90% quantum efficiency at peak
sensitivity wavelength
Wide spectral response range
Low readout noise
Wide dynamic range
MPP operation
High UV sensitivity with good stability
Applications
Fluorescence spectrometer, ICP
Industrial inspection
Semiconductor inspection
DNA sequencer
Low-light-level detection
Raman spectrometer
Selection guide
Type no.
S7030-0906
Cooling
Number of total pixels
Number of effective
pixels
532 × 64
512 × 58
Image size
[mm (H) × mm (V)]
12.288 × 1.392
S7030-0907
S7030-1006
S7030-1007
Non-cooled
532 × 128
1044 × 64
1044 × 128
512 × 122
1024 × 58
1024 × 122
12.288 × 2.928
24.576 × 1.392
24.576 × 2.928
S7031-0906S
532 × 64
512 × 58
12.288 × 1.392
S7031-0907S
S7031-1006S
One-stage
TE-cooled
532 × 128
1044 × 64
512 × 122
1024 × 58
12.288 × 2.928
24.576 × 1.392
S7031-1007S
1044 × 128
1024 × 122
24.576 × 2.928
Note: Two-stage TE-cooled type (S7032-1006/-1007) is available upon request (made-to-order product).
Suitable multichannel
detector head
C7040
C7041
www.hamamatsu.com
1