|
S11661_15 Datasheet, PDF (1/9 Pages) Hamamatsu Corporation – CMOS area image sensors | |||
|
CMOS area image sensors
S11661
S11662
APS (active pixel sensor) type with high near
infrared sensitivity
The S11661 and S11662 are APS type CMOS area image sensors with a high sensitivity in the near infrared region. The
S11661 is SXGA format type (1280 x 1024 pixels), and the S11662 is VGA format type (640 x 480 pixels). Both types include a
timing generator, a bias generator and an A/D converter, and offer digital input/output for easy handling.
Features
Applications
S11661: 1280 Ã 1024 pixels
S11662: 640 Ã 480 pixels
Pixel size: 7.4 à 7.4 μm
Rolling/global shutter readout
3.3 V single power supply operation
High-speed partial readout function
Security (infrared camera, palm vein certiï¬cation)
Position and shape recognition of infrared spot light
Structure
Parameter
Image size (H Ã V)
Pixel size
Pixel pitch
Number of total pixels (H Ã V)
Number of effective pixels (H Ã V)
Number of light-shielded lines
Fill factor
Package
Window material*1 *2
*1: Resin sealing
*2: Reï¬active index=1.523
S11661
S11662
9.472 Ã 7.578
4.736 Ã 3.552
7.4 Ã 7.4
7.4
1320 Ã 1064
680 Ã 520
1280 Ã 1024
640 Ã 480
Upper and left parts: 8 each
Lower and right parts: 32 each
33
Ceramic
Borosilicate glass (without anti-reï¬ective coating)
Unit
mm
μm
μm
pixels
pixels
lines
%
-
-
Absolute maximum ratings
Parameter
Symbol
Condition
Value
Unit
Supply voltage
Vdd(A), Vdd(D) Ta=25 °C
-0.3 to +4.2
V
Input voltage*3
Vi
Ta=25 °C
-0.3 to +4.2
V
Vcp_out terminal voltage
Operating temperature*4
Storage temperature*4
Reï¬ow soldering conditions*5
Vcp_out
Ta=25 °C
-0.3 to +6.5
V
Topr
-10 to +65
°C
Tstg
-10 to +85
°C
Tsol
Peak temperature 260 °C, 3 times (see P.8)
-
*3: SPI_data, SPI_clk, SPI_enable, MCLK, Vref1 to 9, Vr, Vcp_in, All_reset, MST, SPI_reset
*4: No dew condensation
When there is a temperature difference between a product and the surrounding area in high humidity environment, dew condensation
may occur on the product surface. Dew condensation on the product may cause deterioration in characteristics and reliability.
*5: JEDEC level 3 (S11661), JEDEC level 2a (S11662)
Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the
product within the absolute maximum ratings.
www.hamamatsu.com
1
|
▷ |