S10108 Datasheet, PDF (1/3 Pages) Hamamatsu Corporation – For flame eye/using photo IC diode (RoHS compliance) instead of CdS cell

PHOTO IC
Photo IC diode assembly
S10108, S10109
For flame eye/using photo IC diode (RoHS compliance) instead of CdS cell
S10108 and S10109 sensors are designed specifically for flame detection (flame eye) in oil-fired hot water boilers and heaters. These
sensors incorporate a photo IC diode instead of conventional CdS cells and are available with 2 types of incident light direction (head-on
type S10108: and side-on type: S10109). Each sensor is assembled in an easy-to-install package along with the cable.
Features
l Spectral response suitable for detecting oil burner
l Easy-to-install assembly with cable
l Little variation in output current and good linearity
(in comparison with conventional types using
phototransistors and CdS cells)
l RoHS compliant products
Applications
l Flame detection in oil boilers and heaters
l Safety devices and alarms for heat generating devices
l Photorelay control devices
s Absolute maximum ratings (Ta=25 °C)
Parameter
Symbol
Maximum reverse voltage VR Max.
Photocurrent
IL
Forward current
IF
Power dissipation *¹
P
Operating temperature
Topr
Storage temperature
Tstg
*1: Derate power dissipation at a rate of -3.3 mW/°C above Ta=25 °C
Value
-0.5 to +16
10
10
250
-30 to +80
-40 to +85
s Electrical and optical characteristics (Ta=25 °C)
Parameter
Symbol
Condition
Min.
Spectral response range
λ
-
Peak sensitivity wavelength λp
-
Dark current
ID VR=5 V
-
Photocurrent
IL VR=5 V, 100 lx
0.19
Rise time *²
tr
10 to 90 %, VR=7.5 V
RL=10 kΩ, λ=560 nm
-
Fall time *²
tf
90 to 10 %, VR=7.5 V
RL=10 kΩ, λ=560 nm
-
*2: Rise/fall time measurement method
Typ.
300 to 820
560
1.0
0.31
6.0
2.5
PULSED LIGHT
FROM LED
(l=560 nm)
VO
LOAD
RESISTANCE RL
0.1 µF
90 %
VO
10 %
7.5 V
tr
2.5 V
tf
KPICC0041EA
Unit
V
mA
mA
mW
°C
°C
Max.
Unit
-
nm
-
nm
50
nA
0.48
mA
-
ms
-
ms
1