P11159-01AS Datasheet, PDF (1/4 Pages) Hamamatsu Corporation – Small package and high resolution encoder module

Encoder module
P11159-01AS
Small package and high resolution encoder
module
The P11159-01AS is an optical encoder module that consists of a photo IC and red LED. The photo IC incorporates a 4-element
photodiode and a 2-phase digital signal output circuit. When using 0.2 mm pitch slits, the P11159-01AS produces a 2-phase digi-
tal signal output matching the slit movement.
Features
High resolution: 0.05 mm (2-phase output)
Positioning pin for easy alignment
Small package
Suitable for lead-free flow soldering
Applications
Rotary encoder
Linear encoder
Absolute maximum ratings (Ta=25 °C)
Input
(LED)
Parameter
Forward current*¹
Reverse voltage
Power dissipation
Symbol
IF max.
VR max.
P
Value
25
5
100
Supply voltage
Vcc max.
-0.5 to +7
Output
(photo IC)
Output voltage
Output current
Power dissipation*²
Vo max.
Io max.
P
-0.5 to Vcc + 0.5
4
250
Operating temperature
Topr
-40 to +85
Storage temperature
Tstg
-40 to +90
Soldering
Tsol
260 °C, 3 s Max., at least 1 mm away from case surface
*1: Forward current decreases at a rate of 0.5 mA/°C above Ta=55 °C
*2: Power dissipation decreases at a rate of 3.1 mW/°C above Ta=25 °C
Note: The P11159-01AS is not suitable for reflow soldering.
Electrical and optical characteristics (Ta=25 °C, Vcc=5 V, unless otherwise noted)
Parameter
Symbol
Condition
Min.
Typ.
Input
(LED)
Forward voltage
Reverse current
Peak emission wavelength
VF
IF=10 mA
IR
VR=5 V
λp
IF=10 mA
-
1.9
-
-
-
650
Operating supply voltage
Vcc
3.0
-
Output Low level output voltage
(photo IC) High level output voltage
VOL
VOH
IOL=1 mA
-
-
4.5
-
Supply current
Icc
VOA=VOB=L
-
6.0
Duty ratio*³
tAH/tAP
tBH/tBP
IF=5 mA, f=10 kHz
35
35
50
50
Transfer Phase difference*³
θAB IF=5 mA, f=10 kHz
60
90
characteristics Rise time
tr
IF=5 mA, CL=10 pF
-
0.5
Fall time
Maximum response frequency*³ *⁴
tf
IF=5 mA, CL=10 pF
f max. IF=5 mA
-
0.04
50
-
*3: Measured when recommended slits are used in specified position
Response frequency f is the reciprocal of the time required to move one pitch.
*4: Maximum frequency at which no error occurs in the output transition sequence (See operation timing diagram.)
Note: Connect a capacitor of 0.1 μF or more between Vcc and GND terminal.
Max.
2.4
10
-
7.0
0.4
-
10
65
65
120
2
0.3
-
Unit
mA
V
mW
V
V
mA
mW
°C
°C
-
Unit
V
μA
nm
V
V
V
mA
%
%
degree
μs
μs
kHz
www.hamamatsu.com
1