|
L8045_15 Datasheet, PDF (1/2 Pages) Hamamatsu Corporation – Red LED for optical link | |||
|
LED
Red LED for optical link
L8045
Emitter for 50 Mbps optical link
L8045 is optical communication devices designed for POF (Plastic Optical Fiber) data links. L8045 is a highly reliable, high-
power LED that emits red light with a peak at 650 nm optimized for POF. A mini-lens is molded on the package for efficient coupling
to a POF. When used with our recommended driver circuit, a 50 Mbps transmitter can be configured at low cost.
Features
Applications
l Peak wavelength: 650 nm
l High reliability
l High output
l Designed to be used with S8046 or S7141-10
l High-speed data transmission even under poor environmental
conditions with high noise
s Absolute m axim um ratings (Ta=25 °C)
Parameter
Symbol
Value
Unit
Forward current
IF
40
mA
Reverse voltage
VR
5
V
Power dissipation *1
Pmax
250
mW
Operating temperature
Topr
-40 to +85
°C
Storage temperature
Tstg
-40 to +85
°C
Soldering
-
230 °C, 5 s, at least 1.8 mm away from package surface
-
*1: Derate power dissipation at a rate of -1.75 mW /°C above Ta=25 °C
s Electrical and optical characteristics (Ta=25 °C)
Parameter
Symbol
Condition
Min.
Typ.
Max.
Unit
Data rate
fD
NRZ
DC
-
50
Mbps
Forward voltage
VF
IF=20 mA
-
1.9
2.3
V
Reverse current
IR
VR=5 V
-
-
10
µA
Peak wavelength
λp
IF=20 mA
-
650
-
nm
Spectral half width (FW HM)
Fiber-coupled optical output
âλ
IF=20 mA
Po
*2
-
20
-13
-
-
nm
-8
dBm
Rise time at pulse drive
tr
*2 20 to 80 %
-
-
8
ns
Fall time at pulse drive
tf
*2 80 to 20 %
-
-
8
ns
Pulse distortion
âT
*2
-3
-
+1
ns
Jitter
âtj
*2
-
-
3
ns
*2: Input is a pseudo-random bi-phase signal at 50 Mbps.
Average value (duty ratio 50 %) measured by using a plastic fiber of Ï1 mm. SI-POF and NA=0.5 (GH4001 made by
Mitsubishi Rayon).
Measured with the recommended driver circuit shown below. (Measurement conditions: Vcc=4.5 to 5.5 V, R1=750 ⦠,
R2=2.2 kâ¦, R3=22 â¦, C1=35 pF)
Vcc
Icc
SIGNAL INPUT
4.7 mF
1 14 74ACT08 R1
2
3
7
C1
0.1 mF R2
L8045
1
R3 2
3
4
KLEDC0018EB
Note:
· A bypass capacitor (0.1 µF) and another capacitor (4.7 µF) are connected between Vcc and GND at a position within 3 mm from
the lead.
· The center of the optical fiber is aligned with the center of the lens on the package. The distance between the fiber end and the
lens is 0.1 mm.
1
|
▷ |