L11368_15 Datasheet, PDF (1/4 Pages) Hamamatsu Corporation – Infrared LED

Infrared LED
L11368
High output power LED with mini-lens
The L11368 is a high-power LED with a microball lens bonded to the surface of the LED chip having an internal confined
structure. In addition to the microball lens, the LED chip is sealed with a cap with mini-lens to make the output beam even
narrower. This allows highly efficient input of the beam into an optical fiber, making the L11368 well suited for optical fiber
communications.
Features
High radiant output power: 65 μW typ. (IF=50 mA, GI 50)
Cutoff frequency: 50 MHz typ. (IF=50 mA)
Applications
Optical fiber communication
Absolute maximum ratings (Ta=25 °C)
Parameter
Forward current
Reverse voltage
Pulse forward current
Power dissipation
Operating temperature
Symbol
IF
VR
IFM
P
Topr
Condition
Pulse width=10 μs
Duty ratio=50%
Specification
Unit
60
mA
3
V
100
mA
170
mW
-30 to +85
°C
Storage temperature
Tstg
-40 to +100
°C
Soldering
-
260 °C or less, within 5 s, at least 1 mm away from lead root
-
Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the
product within the absolute maximum ratings.
Electrical and optical characteristics (Ta=25 °C)
Parameter
Symbol
Condition
Min.
Typ.
Peak emission
wavelength
λp IF=50 mA
850
870
Spectral half-width
Δλ IF=50 mA
-
35
Forward voltage
VF IF=50 mA
-
2.0
Pluse forward voltage VFP IF=100 mA
-
2.4
Reverse current
IR VR=3 V
-
-
Fiber end output
Pf IF=50 mA, GI 50
45
65
Cutoff frequency*
fc IF=50 mA + 1 mAp-p
35
50
* Frequency at which the light output drops by 3 dB relative to the output at 100 kHz
Max.
Unit
890
nm
50
nm
2.4
V
3.6
V
10
μA
-
μW
-
MHz
www.hamamatsu.com
1