English
Language : 

L11354-01_15 Datasheet, PDF (1/12 Pages) Hamamatsu Corporation – Photo IC for optical link
Photo IC for optical link
L11354-01
S11355-03
P11379-04AT
Transmitter Receiver
photo IC photo IC
L11354-01 S11355-03
Transmitter/
receiver photo IC
P11379-04AT
For 150 Mbps optical link
This photo IC is capable of data communication at a data rate of 150 Mbps through a plastic optical fiber (POF). Its
transmitter is composed of a 650 nm RC (resonant cavity) type LED, which is suitable for POF communications, and a driver
circuit that supports an LVDS interface.
The transmitter has a built-in temperature compensation function that adjusts for the reduction in the light emission power
caused by the high temperature emitted from the RC type LED. This function makes light emission with stable power
possible over a wide temperature range. The receiver is composed of a PIN photodiode and signal processing circuit. The
adoption of a full differential structure using a dummy photodiode eliminates the effects of external noise, achieving high
sensitivity. In addition, the photo IC has a sleep function that suppresses power consumption by switching to standby mode
when there is no input.
This product features high quality and high reliability, allowing it to be installed even in automobiles for in-vehicle
networking. It is already used as an optical fiber transceiver (FOT) for a MOST network, which is a type of in-vehicle
multimedia network. POFs with ferrule are also available.
Features
Applications
Communication speed up to 150 Mbps
Sidelooker type and SMD type are available.
3.3 V power supply operation
Wide operating temperature: -40 to +95 °C
Suitable for reflow soldering
Sleep mode function
Data transmission in harsh, noisy environments, such
as in FA and OA.
High-speed, short-distance data transmissio
Only for vehicle networks (MOST)
MOST compliant products
Specifications of these products are subject to
change without prior notice to keep up with
changes in the MOST standard.
Absolute maximum ratings
Parameter
Symbol
Condition
Value
Unit
L11354-01
P11379-04AT
Vcc_TX
-0.5 to +7.0
Supply
voltage
(Transmitter)
S11355-03
Ta=-40 to +95 °C
V
P11379-04AT
Vcc_RX
-0.5 to +4.6
(Receiver)
Input voltage
Vi
Ta=-40 to +95 °C
-0.5 to Vcc+0.5
V
L11354-01
350
Power
dissipation
S11355-03
P
Ta=-40 to +95 °C
320
mW
P11379-04AT
1250
Operating temperature
Topr
-40 to +95
°C
Storage temperature
Tstg
-40 to +110
°C
Reflow soldering conditions*1
Tsol
Peak temperature 260 °C max., 3 times (see page 12)
-
*1: JEDEC level 2a
Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the
product within the absolute maximum ratings.
Recommended operating conditions
Parameter
Supply voltage
Data rate
Symbol
Condition
Min.
Typ.
Vcc
3.135
3.3
fD DCA coding
-
-
www.hamamatsu.com
Max.
3.465
150
Unit
V
Mbps
1