H7827-001_08 Datasheet, PDF (1/2 Pages) Hamamatsu Corporation – photosensor modules consist of a 28-mm (1-1/8") diameter side-on photomultiplier tube

Photosensor Modules
H7827 Series
The H7827 series photosensor modules incorporate a 19-mm (3/4") diameter
head-on photomultiplier tube, a high-voltage power supply circuit and a low
noise amplifier. Two types of amplifiers are available with a current-to-voltage
conversion factor of 1 V/µA or 0.1 V/µA and a frequency bandwidth of DC to
20 kHz or DC to 200 kHz. Two types of photomultiplier tubes with different
spectral response characteristics are provided for measurement in the visible
range or visible to near IR range.
Product Variations
Type No.
H7827-001
H7827-011
H7827-002
H7827-012
Spectral Response Current-to-Voltage Conversion Factor Frequency Bandwidth
Features
300 nm to 650 nm
300 nm to 850 nm
1 V/µA
DC to 20 kHz
For general applications in visible range
For visible to near IR range
300 nm to 650 nm
300 nm to 850 nm
0.1 V/µA
DC to 200 kHz
For general applications in visible range
For visible to near IR range
Specifications
Parameter
H7827 Series
Unit
Suffix
Input Voltage
Max. Input Voltage
Max. Input Current
Max. Control Voltage
-001 / -002
-011 / -012
—
±11.5 to ±15.5
V
±18
V
+45/-1 (-001/-011), +50/-8 (-002/-012)
mA
+1.2 (Input Impedance 100 kΩ)
V
Recommended Control Voltage Adjustment Range
+0.5 to +1.1
V
Effective Area
Sensitivity Adjustment Range
Peak Sensitivity Wavelength
Luminous Sensitivity
Min.
Typ.
Blue Sensitivity Index (CS 5-58) Typ.
Red/White Ratio
Typ.
Radiant Sensitivity *¹ Typ.
15
1: 10³
420
380
60
80
90
120
10.5
—
—
0.2
85
49
mm
—
nm
µA/lm
—
—
mA/W
Suffix (with internal 20 kHz amp)
Luminous Sensitivity *²
Min.
Typ.
Radiant Sensitivity *¹ *² Typ.
Voltage Output Depending Typ.
on PMT Dark Current *² *³ *⁴ Max.
Max. Output Signal Voltage
Current-to-Voltage Conversion Factor
Suffix (with internal 200 kHz amp)
Luminous Sensitivity *²
Min.
Typ.
Radiant Sensitivity *¹ *² Typ.
Voltage Output Depending Typ.
on PMT Dark Current *² *³ *⁴ Max.
Max. Output Signal Voltage
Current-to-Voltage Conversion Factor
-001
1.0 × 10⁷
5.0 × 10⁷
47
3
20
-002
1.0 × 10⁶
5.0 × 10⁶
4.7
0.3
2
+10 (Load resistance 10 kΩ)
1
+10 (Load resistance 10 kΩ)
0.1
-011
1.0 × 10⁷
3.0 × 10⁷
13
3
20
-012
1.0 × 10⁶
3.0 × 10⁶
1.3
0.3
2
V/lm
V/nW
mV
V
V/µA
V/lm
V/nW
mV
V
V/µA
H7827 series
Offset Voltage
Typ.
±3
mV
Ripple Noise *² *⁵ (peak to peak) Max.
0.6
mV
Settling Time *⁶
Max.
0.2
s
Operating Ambient Temperature *⁷
+5 to +45
°C
Storage Temperature *⁷
-20 to +50
°C
Weight
80
g
*1: Measured at the peak sensitivity wavelength *2: Control voltage = +1.0 V *3: After 30 minutes storage in darkness
*4: Output of anode dark current *5: Cable RG-174/U, Cable length 450 mm, Load resistance = 1 MΩ, Load capacitance = 22 pF
*6: The time required for the output to reach a stable level following a change in the control voltage from +1.0 V to +0.5 V *7: No condensation.