E5815-01_15 Datasheet, PDF (1/2 Pages) Hamamatsu Corporation – ACTIVE D TYPE SOCKET ASSEMBLY

The E5815-01 consists of a socket and voltage divider
circuit to operate a 28 mm (1-1/8") side-on photomulti-
plier. Its circuit utilizes transistor devices in the three fi-
nal stages. The E5815-01 can give superior DC linear-
ity characteristics. Additionally, the overall length is
less than 30 mm. The performance is convenient es-
pecially for color scanner application, etc.
ACTIVE D TYPE
SOCKET ASSEMBLY
E5815-01
SPECIFICATIONS
MAXIMUM RATINGS
Parameter
Max. Supply Voltage between Case and Terminals
Max. Supply Voltage between GND and HV cable
Max. Voltage Divider Current (at Max. Supply Voltage)
Power Consumption (at Max. Supply Voltage)
Value
1500
-1500
0.46
682
CHARACTERISTICS (at 25 °C)
Parameter
Insulation Resistance between Case and Terminals
Min.
Leakage Current in Signal ^A
Max.
Total Voltage Divider Resistance in Operation
Max. Linear Output in DC Mode (at Max. Supply Voltage) ^B
Signal Output
Operating Ambient Temperature ^C
Storage Temperature ^C
Value
1 × 10¹¹
1 × 10^-10
3.3
100
DC / Pulse
0 to +50
-15 to +60
Weight
44
NOTE: AAt -1000 V supply voltage between GND and HV cable.
BThe current at which output of photomultiplier tube deviates by ±1 % from the linear (Reference to Figure 2)
Unit
V
V
mA
mW
Unit
Ω
A
MΩ
µA
—
°C
°C
g
CNo condensation
Figure 1: DC Linearity
TACCB0015EB
25
Figure 2: Maximum Output Under ±1 % DC Linearity
10^{-3 TACCB0016EB}
20 _{RESISTIVE CHAIN TYPE}
(SUPPLY VOLTAGE: -1000 V)
15
E5815-01
10 _{(SUPPLY VOLTAGE: -1000 V)}
5
E5815-01
10^-4
10^-5
RESISTIVE CHAIN TYPE
0
10^-6
E5815-01
-5 ^{(SUPPLY VOLTAGE: -300 V)}
-10
10^-7
10^-6
10^-5
10^-4
10^-3
OUTPUT CURRENT (A)
10^-7
0
-500
-1000
SUPPLY VOLTAGE (V)
-1500
CAUTION
• When getting output anode current over operating area shown at Figure 2, there may be a sudden change in output. It would be
caused by divider current but not lead E5815-01 to break down.
• When supplying high voltage with opposite polarity (+) by mis-handling, it lead an internal damage in E5815-01. Therefore, please
take care to see the polarity of high voltage before operation.
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2012 Hamamatsu Photonics K.K.