E5771-01_15 Datasheet, PDF (1/2 Pages) Hamamatsu Corporation – D-TYPE ACTIVE MODULE

D-TYPE ACTIVE MODULE
E5771-01
for 28 mm Side-on PMT
The E5771-01 is a voltage divider to operate a 28 mm Side-on photo-
multiplier tube. The compact configuration is convenient to attach di-
rectly on tracing circuit board. Additionally, the built-in circuit utilizes
transistor devices in the final three stages, so that the E5771-01 can
give superior DC linearity characteristic under a low power consump-
tion.
SPECIFICATIONS
Parameter
Description / Value Unit
Applicable PMT
28 mm Side-on type —
Max. Supply Voltage between Case and Pins
1500
V
Max. Supply Voltage between Pin#1 and #11
1500
V
Max. Divider Current between Pin#1 and #11
0.29
mA
Max. Power Consumption Between Pin#1 and #11 0.44 (at 1500 V) W
Insulation Resistance between Case and Pins Min.
1 × 10¹¹
Ω
Voltage Distribution Ratio among Pin#1 to #11 1: 1: 1: ^...... : 1: 1: 1 —
Max. Linear Output in DC Mode
Typ.
100
µA
Operating Temperature
-20 to +50
°C
Figure 1: DC Linearity of E5771-01
TACCB0051EC (In the case of R928 with negative high voltage usage)
20
CONVENTIONAL D-TYPE
: SUPPLY VOLTAGE = -1000 V
10
E5771-01
: SUPPLY VOLTAGE = -300 V
0
E5771-01
: SUPPLY VOLTAGE = -1000 V
Figure 2: Maximum Output under ±1 %
DC Linearity of E5771-01
TACCB0053EB (In the case of R928 with negative high voltage usage)
10^-3
E5771-01
10^-4
10^-5
CONVENTIONAL D-TYPE
10^-6
-10
10^-7
10^-6
10^-5
10^-4
10^-3
OUTPUT ANODE CURRENT (A)
10^-7
-300 -400 -500 -600 -700 -800 -900 -1000 -1100 -1200 -1300
SUPPLY VOLTAGE (V)
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2011 Hamamatsu Photonics K.K.