E10679-02_15 Datasheet, PDF (1/2 Pages) Hamamatsu Corporation – D TYPE SOCKET ASSEMBLIES

D TYPE SOCKET ASSEMBLIES
E10679-02, E10679-51
The E10679-02 and E10679-51 are D-type socket assem-
blies for the R9880U series metal package photomultiplier
tubes.
The E10679-02 has an output cable, while the E10679-51
has output pins for mounting on a circuit board.
FEATURES
GCable Output and Pin Output
GCompact and Lightweight
Left: E10679-02, Right: E10679-51
SPECIFICATIONS
Parameter
E10679-02
E10679-51
Unit
Grounded Electrode / Supply Voltage Polarity
Anode / Negative
—
Max. Insulation Voltage Between Case and Terminals
1100
V
Max. Supply Voltage Between Power Supply Terminals
1100
V
Max. Voltage Divider Current (at Max. Power Supply Voltage)
0.32
mA
Power Consumption (at Max. Power Supply Voltage)
350
mW
Insulation Resistance Between Case and Terminals
Min.
1 × 10¹¹
Ω
Leakage Current in Signal
Max.
1 × 10^-10
A
Total Voltage Divider Resistance
3.46
MΩ
Max. Linear Output in DC Mode (at Max. Power Supply Voltage)
16
µA
Signal Output
DC/Pulse
—
Operating Ambient Temperature
0 to +50
°C
Storage Temperature
-15 to +60
°C
Weight
17
4.8
g
CIRCUIT DIAGRAMS
E10679-02
K
DY1 DY2 DY3 DY4 DY5 DY6 DY7 DY8 DY9 DY10
P
5
12 11 10 1 9 2 8 3 7 4 6
R12 R13
R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11
-HV
AWG22
(VIOLET / TFE)
C1 C2 C3
R1 to R10: 330 kΩ ± 5 % 1/8 W
R11: 160 kΩ ± 5 % 1/8 W
R12, R13: 51 Ω ± 5 % 1/8 W
C1 to C3: 0.01 µF, 200 V
GND
AWG22
(BLACK)
MAXIMUM HIGH VOLTAGE = -1100 V
DIVIDER CURRENT = 318 µA
SIGNAL
OUTPUT
RG-174/U
(BLACK)
TACCC0165EA
E10679-51
K
DY1 DY2 DY3 DY4 DY5 DY6 DY7 DY8 DY9 DY10
P
5
12 11 10 1 9 2 8 3 7 4 6
R12 R13
R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11
CATHODE
R1 to R10: 330 kΩ ± 5 % 1/8 W
R11: 160 kΩ ± 5 % 1/8 W
R12: 51 Ω ± 5 % 1/8 W
R13: 100 Ω ± 5 % 1/8 W
C1 to C3: 0.01 µF, 200 V
C1 C2 C3
GND
MAXIMUM HIGH VOLTAGE = -1100 V
DIVIDER CURRENT = 318 µA
ANODE
TACCC0166EA
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2014 Hamamatsu Photonics K.K.