C8225-01_15 Datasheet, PDF (1/2 Pages) Hamamatsu Corporation – Pulse generator for NMOS linear image sensor

Pulse generator for NMOS linear
image sensor driver circuit
C8225-01
Pulse generator for NMOS linear image sensor
The C8225-01 is a pulse generator specifically designed for NMOS linear image sensor driver circuit. The C8225-01 provides
the driver circuit with a master start pulse and master clock pulse which can be preset by rotary switches.
The C8225-01 uses a quartz oscillator as the reference clock that delivers high-precision master start and clock pulses.
When a separate pin connector and socket are installed on the circuit board, the C8225-01 can be mounted directly on the
C7884 series image sensor driver circuit board.
Directly mountable on C7884 series
Compact
Single power supply (+5 V) operation
Master start interval: 1 μs to 50 s (1-2-5 sequence)
Master clock frequency: 62.5 kHz to 32 MHz
Specifications (Ta=25 °C)
Parameter
Symbol
Condition
Min.
Typ.
Max.
Unit
Supply voltage
+Vs
+4.5
+5.0
+5.5
V
Current consumption*¹
+Is
+5 V
-
-
50
mA
Operating temperature*²
Topr
0 to +50
°C
Storage temperature*²
Tstg
-10 to +60
°C
*1: Current consumption depends on the clock frequency.
*2: No condensation
Note:
ɾHas no input/output connector
ɾRecommended input/output connector is FAP-10-07#2 (made by Yamaichi Electronics Co., Ltd. sold separately). Equivalent connectors
are available from other manufacturers.
ɾWhen mounting the C8225-01 on a driver circuit, use a 6-pin socket (PM-1 made by Mac-Eight Co., Ltd.) on the driver circuit and a
6-pin plug (OY-003 made by Mac-Eight) on the C8225-01.
ɾCustom products with an input/output connector pre-mounted are available on request. Feel free to contact our sales office.
ɾWe welcome custom requests.
Timing chart
CLK
Start
KACCC0126EB
www.hamamatsu.com
1