C7169 Datasheet, PDF (1/4 Pages) Hamamatsu Corporation – Power Supply for PMT Modules

Related Products
Power Supply for PMT Modules C7169
The C7169 is a power supply unit for driving photosensor modules. Both drive volta-
ges and control voltages can be supplied from this one unit.
Applicable products:
H5773/H5783/H6779/H6780 Series, H5784 Series
H7710/H8567 Series, H7711/H7712/H8568/H8569 Series
H7732 Series, H7826 Series, H7827 Series, H8249 Series
Parameter
Output Voltage
Input Current
Max.
Control Voltage (variable voltage range)
AC Input Voltage
Input Power Frequency
Operating Ambient Temperature
Storage Temperature
Output Connector
Dimensional Outlines
Weight
Value
Unit
±15
V
0.3 (+15 V), 0.2 (-15 V)
A
0 to +1.2
V
100 to 240
V
50/60
Hz
+5 to +50
°C
-20 to+50
°C
Binding post
—
147 × 61 × 200
mm
Approx.1.2
kg
Amplifier Units
These are amplifier units for photomultiplier tubes and current output type PMT modules.
C7319: Switchable between 2 frequency bandwidths and 3 current/voltage conversion
coefficients. Ideal for applications requiring low noise and high gain.
C6438: Wide bandwidth from DC to 50 MHz and gain of 20 dB. (-01 type is 54 dB)
C5594: High cut off frequency of 1.5 GHz. Faithfully amplifies high-speed output pulses.
The input/output connector can be selected from the SMA or BNC types.
From left: C7319, C6438, C5594-44
Parameter
C7319
C6438
C6438-01
C5594-44 *⁶
Frequency Bandwidth DC to 20 kHz or DC to
(-3 dB)
200 kHz (switchable)*¹
DC to 50 MHz
DC to 50 MHz
50 kHz to 1.5 GHz
Voltage Gain
— *²
20 ± 3 *⁴ (approx. 10 times) 54 ± 3 *⁴ (approx. 500 times) 36 *⁴ (approx. 63 times)
Current-to-Voltage
Conversion Factor
100 mV/µA, 1 V/µA
or 10 V/µA (switchable)
0.5 mV/µA *⁵
25 mV/µA *⁵
3.15 mV/µA *⁵
Amplifier Input (output) ±Current (inverted) ±Voltage (non-inverted) ±Voltage (non-inverted) -Voltage (non-inverted)
Input Impedance
— *²
50
50
50
Recommended Load Resistance
—
50
50
50
Max. Output Signal Voltage
±13 *³
±1 *⁴
±1 *⁴
-2.5 *⁴
Input
BNC-R
BNC-R
BNC-R
BNC-R
Connector
Output
BNC-R
BNC-R
BNC-R
BNC-R
Power
DIN (6-pin)
DIN (6-pin)
DIN (6-pin)
—
Input Voltage
±5 to ±15
±5
±5
+12 to +16
Input Current Max.
±16
±55
±80
+95
Dimensions
60 × 43.2 × 65
60 × 43.2 × 65
60 × 43.2 × 65
54 × 17 × 33
Weight
Approx.170
Approx.160
Approx.160
Approx.80
*1: Frequency bandwidth is limited to DC to 100 kHz at conversion coefficient of 10 V/µA. *2: C7319 is current input type.
*3: At ±15 V Supply voltage and 10 kΩ load resistance. *4: At 50 Ω load resistance.
*5: Value after current-to-voltage conversion by input impedance. *6: Contact our sales office for other connectors for C5594.
56
Unit
—
dB
—
—
Ω
Ω
V
—
—
—
V
mA
mm
g