C5185_15 Datasheet, PDF (1/5 Pages) Hamamatsu Corporation – Amplifi ers for infrared detector

Amplifiers for infrared detector
C4159/C5185 series
C3757-02
Low noise amplifiers for infrared detector
(InSb, InAs, InAsSb, InGaAs, MCT, PbS, PbSe)
Accessories
Instruction manual
Power cable (one end with 4-pin connector for connection to amplifier and the other end unterminated, 2 m) A4372-02
Required power supply specifications
· C4159 series: ±15 V ± 0.5
· C5185 series: ±15 V ± 0.5
· Current-carrying capacity: 1.5 times or more of amplifier's maximum current consumption
· Ripple noise: 5 mVp-p or less
· Analog power supply only
Recommended DC power supply: E3620A, E3630A (Agilent Technologies)
Absolute maximum ratings (Ta=25 °C)
Parameter
Value
Unit
Supply voltage
18.0 max.
V
Operating temperature
0 to +40
°C
Storage temperature
-20 to +70
°C
Note: Absolute maximum ratings are the values that must not be exceeded at any time. If even one of the absolute maximum ratings
is exceeded even for a moment, the product quality may be impaired. Always be sure to use the product within the absolute
maximum ratings.
Ringing specifications
90%
10%
tr
Incident light
Output waveform when tr=40 μs and photosensitive area is ϕ0.6 mm
Ringing Vri ≤ 1.5 V
Oscillating cycle ≤ 3 cycles
KIRDC0090EA
www.hamamatsu.com
1