C4674 Datasheet, PDF (1/3 Pages) Hamamatsu Corporation – Signal processing circuit for 2-D PSD

PSD
Signal processing circuit for 2-D PSD
C4674, C4757, C4758, C7563
Signal processing circuit designed to facilitate operation of 2-D Position Sensitive Detector
Features
l No complicated adjustment required
Position measurement can be made simply by mounting
2-D PSD.
l Output voltage directly representing the position data
The position (mm) of a light spot from the PSD center is
obtained as an output voltage (V).
l Accurate position detection
Accurate position data can be obtained, independent of
light intensity.
l Compact on-board configuration
A head amplifiers, signal addition/subtraction circuits, and
analog divider are mounted on a compact PC board.
Applications
l Displacement measurements using 2-D PSD
l Various studies using 2-D PSD
l Evaluation of 2-D PSD
s Four models are available to meet various 2-D PSD types
PSD type
DC signal processing circuit
Pin-cushion type PSD
C4674
Duo-lateral type PSD
C4757
Tetra-lateral type PSD
C4758
q DC signal processing circuit
Suitable for DC light displacement measurement.
q AC signal processing circuit
Designed specifically for pulse (AC) signal detection.
Has a synchronous circuit, S/H (sample & hold) circuit and LED driver circuit.
Use of a pulse-driven LED ensures reliable operation even under background light.
AC signal processing circuit
C7563
-
-
s Combination with Hamamatsu 2-D PSD
Each signal processing circuit can be used with the following Hamamatsu 2-D PSD.
PSD
Signal
processing circuit
S1880
C4674
O
C4757
C4758
C7563
O
*1: Connected externally
*2: Using attachment board
S1881
O ^*1
Pin-cushion type
S2044
O
S5990-01
O ^*2
S5991-01
O ^*2
O ^*1
O
O ^*2
O ^*2
Duo-lateral
type
S1300
Tetra-lateral
type
S1200
O
O
s Accessories
The mating connectors to a power supply/signal readout device and the boards for mounting surface-mounting ceramic
package PSD are supplied with each signal processing circuit.
Type No.
Supplied connector
Accessory
Attachment board
C4674
HDEB-9S (made by Hirose Electric)
for mounting S5990-01, S5991-01
C4757
-
C4758
HDAB-15S (made by Hirose Electric)
-
C7563
for mounting S5990-01, S5991-01
1