C10460_15 Datasheet, PDF (1/4 Pages) Hamamatsu Corporation – Signal processing unit for PSD module

Signal processing unit for PSD module
C10460
Specifically dedicated for PSD module
(C10443 series)
The C10460 is a signal processing unit specifically design to convert the output from a PSD module (C10443 series) into
position signals.
Position signals are output as both analog and digital signals. In case of analog output, connecting the output connector
to a voltmeter shows an output voltage that directly represents the position information (The output voltage indicates a
position from the center of the PSD, 1 V=1 mm). While, digital output allows serial connection (RS-232C) to a PC. Position
information can be easily loaded into a PC via the sample software that comes with the unit.
Features
Applications
Both analog and digital outputs
Analog output: Output voltage directly represents the
position information.
Digital output: High-resolution digital output (16-bit)
AC adapter (+12 V) operation
Supplies power to PSD modules
Optical axis alignment
Range finder
Three-dimensional measurement
Length measurement
Liquid level sensors
Distortion measurement
Absolute maximum ratings (Ta=25 °C, unless otherwise noted)
Parameter
Symbol
Min.
Supply voltage
Vcc
-
Input voltage
Vin
-13
Output voltage
Vout
-15
Operating temperature*¹
Topr
0
Storage temperature*¹
Tstg
-10
Max.
Unit
+18
V
+13
V
+15
V
+40
°C
+60
°C
Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the
product within the absolute maximum ratings.
*1: No condensation
Specifications (Ta=25 °C, Vcc=+12 V, unless otherwise noted)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Supply voltage
Vcc
+9
+12
+18
V
Input voltage
Vin
-12
-
0
V
Current consumption
Icc
-
200
-
mA
www.hamamatsu.com
1