C10459_C10460_KACC1135E04 Datasheet, PDF (1/3 Pages) Hamamatsu Corporation – Signal processing unit for PSD module

MODULE
Signal processing unit for PSD module
C10459, C10460
Specifically dedicated for PSD modules (C10442/C10443 series)
C10459 and C10460 are signal processing unit specifically design to convert the output from a PSD module (C10442/C10443 series) into position
signals. C10459 is for PSD module C10442 series and C10460 is for C10443 series.
Position signals are output as both analog and digital signals. In case of analog output, connecting the output connector to a voltmeter shows an
output voltage that directly represents the position information (The output voltage indicates a position from the center of the PSD, 1 V=1 mm).
While, digital output allows serial connection (RS-232C) to a PC. Position information can be easily loaded into a PC via the sample software that
comes with the unit.
Features
l Both analog and digital outputs
Analog output: Output voltage directly represents the
position information
Digital output: High-resolution digital output (16-bit)
l AC adapter (+12 V) operation
l Supplies power to PSD modules
Applications
l Optical axis alignment
l Range finder
l 3-dimensional measurement
l Length measurement
l Liquid level sensors
l Distortion measurement
s Absolute maximum ratings (Ta=25 °C)
Parameter
Symbol
Supply voltage
Vcc Max.
Maximum input voltage Vin Max.
Maximum output voltage Vout
Operating temperature *¹ Topr
Storage temperature *¹
Tstg
*1: No condensation
Value
+18
±13
±15
0 to +40
-10 to +60
s Specifications (Vcc=+12 V, Ta=25 °C, unless otherwise noted)
Parameter
Symbol
Min.
Typ.
Supply voltage
Vcc
+9
+12
Input voltage
Vin
-12
-
Current consumption
Icc
-
200
Max.
+18
0
-
Analog section
Parameter
Symbol
Min.
Typ.
Output amplitude voltage
Vout
-10
-
Output noise voltage
Vn
-
5
Offset voltage
Vos
-5
-
Position detection error
E
-
±3
Position resolution *²
∆R
-
5
Cut-off frequency (-3 dB)
fc
-
13.5
*2: Reference value. Values may vary depending on operating environment.
Max.
+10
-
+5
-
-
-
Digital section
Parameter
Symbol
Min.
Typ.
Max.
Signal conversion
time - mode 1 *³
Tr1
2
-
-
Signal conversion
time - mode 2 *⁴
Tr2
5
-
-
Output form
-
Conforms to RS-232C (output position signals and light power)16-bit
*3: Communication parameter 115200 bps/8-bit/Non-parity/1 stop bit
*4: Communication parameter 38400 bps/8-bit/Non-parity/1 stop bit
Unit
V
V
V
°C
°C
Unit
V
V
mA
Unit
V
mVp-p
mV
%
µm
kHz
Unit
ms
ms
-
1