C10013SK Datasheet, PDF (1/6 Pages) Hamamatsu Corporation – Flat panel sensor High reliability, high sensitivity

IMAGE SENSOR
Flat panel sensor
C10013SK
High reliability, high sensitivity
Flat panel sensor C10013SK is a digital X-ray image sensor newly developed as a key device for open-type tube application, radiography and
other real-time X-ray imaging applications requiring high resolution and high image quality.
Features
l Low noise: 80 electrons
l Energy range: 150 kVp Max.
l High quality image: 1 Mpixels
l Pixel size: 50 × 50 µm
l Digital output (12-bits)
l High-speed imaging:
4 frames/s (single binning)
l Long life: 150 kVp, 2 MR
l Wide dynamic range
Applications
l Open type tube application
l Radiography
s Block diagram
C10013SK is a lightweight and compact flat panel sensor consisting of a sensor board and a control board. Each pixel has low
noise amplifier. Analog video signals are amplified as the charge on each video line by 1056 ch differential amplifiers with CDS
(Correlated Double Sampling) circuits, and are output from each of 8 amplifier arrays. The control board converts the analog
video signal into a 12-bit digital signal and outputs it to an external frame grabber through the 12-bit parallel port.
PIXEL NUMBER
12
1057
1055 1056
2111 2112
FOP WITH
GOS SCINTILLATOR
(52.8 mm × 52.8 mm)
PHOTODIODE
ARRAY
EXTERNAL POWER SUPPLY
A.vdd, D.vdd
(not attached)
IntExt
1115135 1115136
DIFFERENTIAL
DIFFERENTIAL
AMP ARRAY No. 1 AMP ARRAY No. 8
TIMING
PULSE
GENERATOR
BIAS
GENERATOR
BUFFER
AMP
PROCESSING
AMP
BUFFER
AMP
PROCESSING
AMP
OSCILLATOR
ExtTrgLemo
ExtTrgGrb
Vsync
Hsync
Pclk
A/D FIFO
A/D FIFO
VIDEO OUTPUT
(12 BIT DIGITAL)
Note: Signals are readout in order of pixel number.
KACCC0207EB
1