RS07A Datasheet, PDF (1/2 Pages) Microdiode Electronics (Jiangsu) Co.,Ltd. – SURFACE MOUNT FAST RECOVERY RECTIFIER

SOD-123
Cathode Band
Top View
2.80.1
RS07A THRU RS07M
SU R FACE MOUNT FAST RECOVERY RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current -
Forward Current - 0.7 Ampere
FEATURES
Glass passivated device
Ideal for surface mouted applications
Low reverse leakage
Metallurgically bonded construction
High temperature soldering guaranteed:
250 C/10 seconds,0.375”(9.5mm) lead length,
5 lbs. (2.3kg) tension
0.60.25
3.70.2
Dimensions in millimeters
MECHANICAL DATA
Case: JEDEC SOD-123FL molded plastic body over passivated chip
Terminals: Solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
SYMBOLS RS07A RS07B RS07D RS07G RS07J RS07K RS07M
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
VRRM
VRMS
VDC
RA RB
RD
50 100 200
35 70 140
50 100 200
RG
RJ
RK
RM
400 ⁶⁰⁰ 800 ¹⁰⁰⁰
280 ⁴²⁰ 560 ⁷⁰⁰
400 ⁶⁰⁰ 800 ¹⁰⁰⁰
Maximum average forward rectified current
I(AV)
0.7
at TA=65 C (NOTE 1)
Peak forward surge current
8.3ms single half sine-wave superimposed on
IFSM
25.0
rated load (JEDEC Method) TL=25 C
Maximum instantaneous forward voltage at 0.7A VF
1.15
Maximum DC reverse current TA=25 C
at rated DC blocking voltage TA=125 C
IR
10.0
50.0
Maximum reverse recovery time (NOTE 2)
trr
150
250
500
Typical junction capacitance (NOTE 3)
CJ
4
Typical thermal resistance (NOTE 4)
RθJA
Operating junction and storage temperature range _TJ,TSTG
180
-55 to +150
UNITS
VOLTS
VOLTS
VOLTS
Amp
Amps
Volts
µA
ns
pF
K/W
C
Note: 1.Averaged over any 20ms period.
2.Measured with IF=0.5A, IR=1A, Irr=0.25A.
3.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
4.Thermal resistance junction to ambient, 6.0 mm2 coppeer pads to each terminal.
1