P6KE6.8_13 Datasheet, PDF (1/4 Pages) Gaomi Xinghe Electronics Co., Ltd. – TRANSIENT VOLTAGE SUPPRESSOR

P6KE6.8 THRU P6KE440
TRANSIENT VOLTAGE SUPPRESSOR
Reverse Voltage - 6.8 to 440 Volts
PEAK PULSE POWER-600 Watts
FEATURES
600 Watts Pulse capability
Excellent clamping capability
Low incremental surge resistance
Fast response time
High temperature soldering guaranteed: 260 C/10 seconds at terminals
Component inaccordance to RoHS 2002/95/EC and WEEE 2002/96/EC
MECHANICAL DATA
Case: JEDEC DO-15 molded plastic body
Terminals: Plated axial leads, solderable per MIL-STD-750,method 2026
Polarity: color band denotes cathode end
Mounting Position: Any
Weight: 0.014ounce, 0.39 gram
DO-15
0.140(3.6)
0.104(2.6)
DIA
1.0(25.4)
MIN
0.300(7.60)
0.230(5.60)
0.036(0.90)
0.028(0.70)
DIA
1.0(25.4)
MIN
Dimensions in inches and (millimeters)
DEVICES FOR BIDIRECTIONAL APPLICATIONS
1. For bi-directional use C or CA suffix for Types P6KE6.8 thru Types P6KE440.
2. Electrical characterstics apply in both directions.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Rating at 25 C ambient temperature unless otherwise specified)
Peak power dissipation at TA=25 C,TP=1ms(Note 1.)
Symbols
PPK
Valuse
Min.600
Units
Watts
Steady state power dissipation at Tj=75 C lead length 0.375"(9.5mm)(Note 2.)
PM
5.0
Watts
Peak forward surge current,8.3ms single half sine-wave superimposed
on rated load (JEDEC method)(Note 3.)
IFSM
100.0
Amps
Maximum instantaneous forward voltage at 50.0A for unidirectional only(Note 4.)
Operating and storage temperature range
VF
TJ,TSTG
3.5/5.0
-55 to +175
Volts
C
Note: 1.Non repetitive current pulse and derated above TA=25 C
2.Mounted on copper pads area of 1.6X1.6"(40X40mm)
3.Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum
4.VF=3.5 Volts max. for devices of V(BR) 200V, and VF=5.0Volts max. for devices of V(BR)>200V.
1