A1 Datasheet, PDF (1/2 Pages) Gaomi Xinghe Electronics Co., Ltd. – Glass passivated device

A1-A7
SOD-123FL
Cathode Band
Top View
2.80.1
FEATURES
Glass passivated device
Ideal for surface mouted applications
Low reverse leakage
Metallurgically bonded construction
High temperature soldering guaranteed:
250 C/10 seconds,0.375”(9.5mm) lead length,
5 lbs. (2.3kg) tension
0.60.25
3.70.2
Dimensions in millimeters
MECHANICAL DATA
Case: JEDEC SOD-123FL molded plastic body over passivated chip
Terminals: Solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight:0.006 ounce, 0.02 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
SYMBOLS
A1
A2
A3
A4
A5
A6
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
VRRM
VRMS
VDC
50 100 200 400
35
70
140 280
50 100 200 400
600 800
420 560
600 800
Maximum average forward rectified current
I(AV)
1.0
at TA=65 C (NOTE 1)
Peak forward surge current
8.3ms single half sine-wave superimposed on
IFSM
25.0
rated load (JEDEC Method) TL=25 C
Maximum instantaneous forward voltage at 1.0A
VF
1.1
Maximum DC reverse current TA=25 C
at rated DC blocking voltage TA=125 C
IR
10.0
50.0
Typical junction capacitance (NOTE 2)
CJ
4
Typical thermal resistance (NOTE 3)
RθJA
Operating junction and storage temperature range _TJ,TSTG
180
-55 to +150
Note: 1.Averaged over any 20ms period.
2.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
3.Thermal resistance from junction to ambient at 0.375” (9.5mm)lead length,P.C.B. mounted
A7
1000
700
1000
UNITS
VOLTS
VOLTS
VOLTS
Amp
Amps
Volts
µA
pF
K/W
C
1