SSH101 Datasheet, PDF (1/2 Pages) Goodwork Semiconductor Co., Ltd . – 1.0 AMP SURFACE MOUNT HIGH EFFICIENCY RECTIFIERS

SSH101 THRU SSH108
1.0 AMP SURFACE MOUNT HIGH EFFICIENCY RECTIFIERS
FEATURES
* Ideal for surface mount applications
* Easy pick and place
* Built-in strain relief
* Fast switching speed
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Metallurgically bonded construction
* Polarity: Color band denotes cathode end
* Mounting position: Any
VOLTAGE RANGE
50 to 1000 Volts
CURRENT
1.0 Ampere
.037(0.95)
.033(0.85)
SS
.106(2.7)
.098(2.5)
.144(3.65)
.136(3.45)
.051(1.3)
.043(1.1)
.007(0.17)
.005(0.13)
.067(1.7)
.059(1.5)
.033(0.85)
.022(0.55)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
SSH101 SSH102 SSH103 SSH104 SSH105 SSH106 SSH107 SSH108 UNITS
50 100 200 300 400 600 800 1000 V
35 70 140 210 280 420 560 700 V
50 100 200 300 400 600 800 1000 V
at Ta=25 C
Peak Forward Surge Current, 8.3 ms single half sine-wave
1.0
A
superimposed on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 1.0A
Maximum DC Reverse Current
Ta=25 C
30
A
1.0
1.3
1.85
V
5.0
A
at Rated DC Blocking Voltage
Ta=100 C
100
A
Maximum Reverse Recovery Time (Note 1)
50
75
nS
Typical Junction Capacitance (Note 2)
Typical Thermal Resistance R JA (Note 3)
15
pF
80
C/W
Operating and Storage Temperature Range TJ, TSTG
-65 +150
C
Marking Code
H11 H12 H13 H14 H15 H16 H17 H18
NOTES:
1. Reverse Recovery Time test condition: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
3. Thermal Resistance from Junction to Ambient.
458