SMU21A Datasheet, PDF (1/2 Pages) Goodwork Semiconductor Co., Ltd . – 2.0 AMP SURFACE MOUNT SUPER FAST RECTIFIERS

SMU21A THRU SMU27A
2.0 AMP SURFACE MOUNT SUPER FAST RECTIFIERS
FEATURES
* Ideal for surface mount applications
* Easy pick and place
* Built-in strain relief
* Super fast recovery time for high speed switching
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Metallurgically bonded construction
* Polarity: Color band denotes cathode end
* Mounting position: Any
VOLTAGE RANGE
50 to 600 Volts
CURRENT
2.0 Amperes
DO-214AC(SMA)
.058(1.47)
.052(1.32)
.110(2.79)
.100(2.54)
.087(2.20)
.071(1.80)
.060(1.52)
.030(0.76)
.177(4.50)
.157(3.99)
.012(0.31)
.006(0.15)
.005
MAX.
(.127)
.205(5.20)
.189(4.80)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TL=110 C
Peak Forward Surge Current, 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 2.0A
Maximum DC Reverse Current
Ta=25 C
at Rated DC Blocking Voltage
Ta=100 C
Maximum Reverse Recovery Time (Note 1)
Typical Junction Capacitance (Note 2)
Operating and Storage Temperature Range TJ, TSTG
SMU21A SMU22A SMU23A SMU24A SMU25A SMU26A SMU27A UNITS
50 100 150 200 300 400 600 V
35
70 105 140 210 280 420 V
50 100 150 200 300 400 600 V
2.0
A
50
0.95
1.3
5.0
500
35
25
-65 +150
A
1.7 V
A
A
nS
pF
C
NOTES:
1. Reverse Recovery Time test condition: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
444