S3AB Datasheet, PDF (1/2 Pages) Won-Top Electronics – 3.0A SURFACE MOUNT GLASS PASSIVATED STANDARD DIODE

S3AB THRU S3MB
3.0 AMP SURFACE MOUNT SILICON RECTIFIERS
FEATURES
* Ideal for surface mount applications
* Easy pick and place
* Built-in strain relief
* Low forward voltage drop
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Metallurgically bonded construction
* Polarity: Color band denotes cathode end
* Mounting position: Any
VOLTAGE RANGE
50 to 1000 Volts
CURRENT
3.0 Amperes
DO-214AA(SMB)
.083(2.11)
.075(1.91)
.096(2.44)
.083(2.13)
.050(1.27)
.030(0.76)
.185(4.70)
.160(4.06)
.155(3.94)
.130(3.30)
.012(0.31)
.006(0.15)
.008
MAX.
(.203)
.220(5.59)
.200(5.08)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TL=75 C
Peak Forward Surge Current, 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 3.0A
Maximum DC Reverse Current
Ta=25 C
at Rated DC Blocking Voltage
Ta=125 C
Typical Junction Capacitance (Note1)
Typical Thermal Resistance R JL (Note 2)
Operating and Storage Temperature Range TJ, TSTG
S3AB
50
35
50
S3BB S3DB
100 200
70 140
100 200
S3GB
400
280
400
S3JB
600
420
600
S3KB
800
560
800
S3MB UNITS
1000 V
700 V
1000 V
3.0
A
100
A
1.1
V
5.0
A
250
A
60
pF
10
C/W
-65 +150
C
NOTES:
1. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2. Thermal Resistance Junction to Lead.
496