KBJ401 Datasheet, PDF (1/2 Pages) UNIOHM CORPORATION – SINGLE PHASE 4.0 AMP BRIDGE RECTIFIERS

KBJ401 THRU KBJ407
SINGLE PHASE 4.0 AMP BRIDGE RECTIFIERS
VOLTAGE RANGE
50 to 1000 Volts
CURRENT
4.0 Amperes
FEATURES
* Ideal for printed circuit board
* Low forward voltage
* Low leakage current
* Mounting position: Any
.995(25.3)
.983(24.7)
KBJ
.134(3.4)
.122(3.1)
.189(4.8)
.173(4.4)
.150(3.8)
.134(3.4)
.083(2.1)
.067(1.7)
.043(1.1)
.035(0.9)
~~
.114(2.9)
.098(2.5)
.031(0.8)
.023(0.6)
.303(7.7)
.303(7.7)
.303(7.7)
SPACING
.287(7.3) .287(7.3) .287(7.3)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward (with heatsink Note 1)
Rectified Current at Tc=100 C (Without heatsink)
Peak Forward Surge Current, 8.3 ms single half sine-wave
KBJ401 KBJ402 KBJ403 KBJ404 KBJ405 KBJ406 KBJ407 UNITS
50 100 200 400 600 800 1000 V
35
70 140 280 420 560 700 V
50 100 200 400 600 800 1000 V
4.0
2.4
A
superimposed on rated load (JEDEC method)
120
A
Maximum Forward Voltage Drop per Bridge Element at 4.0A D.C.
1.1
V
Maximum DC Reverse Current
Ta=25 C
5.0
A
at Rated DC Blocking Voltage
Ta=100 C
500
A
Typical Thermal Resistance R JC (Note 2)
5.5
C/W
Typical Junction Capacitance (Note 3)
45
PF
Operating Temperature Range, TJ
Storage Temperature Range, TSTG
-55 +150
C
-55 +150
C
NOTES
1. Device mounted on 50mm x 50mm x 1.6mm Cu Plate Heatsink.
2. Thermal Resistance from Junction to Case with device mounted on 50mm x 50mm x 1.6mm Cu Plate Heatsink.
3. Measured at 1MHz and applied Reverse Voltage of 4.0V D.C.
270