AB1S Datasheet, PDF (1/2 Pages) Goodwork Semiconductor Co., Ltd . – SINGLE PHASE 0.8 AMP SURFACE MOUNT BRIDGE RECTIFIERS

AB1S THRU AB7S
SINGLE PHASE 0.8 AMP SURFACE MOUNT BRIDGE RECTIFIERS
VOLTAGE RANGE
50 to 1000 Volts
CURRENT
0.8 Ampere
FEATURES
* Ideal for printed circuit board
* Reliable low cost construction utilizing molded
plastic technique
* High surge current capability
* Polarity: Symbol molded on body
* Mounting position: Any
ABS
+
.028(0.7)
.181(4.6) _.024(0.6)
.165(4.2)
~
~
.031(0.8)
.023(0.6)
.065(1.65)
MAX.
.193(4.9)
.177(4.5)
.106(2.7)
.090(2.3)
.057(1.45)
.049(1.25)
.275(7.0)
MAX.
.008(0.2)
MAX.
.010(.25)
.006(.15)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
AB1S
50
35
50
AB2S
100
70
100
AB3S
200
140
200
AB4S AB5S
400 600
280 420
400 600
AB6S
800
560
800
AB7S UNITS
1000 V
700 V
1000 V
at Ta=40 C
- on glass-epoxy P.C.B. (Note 1)
- on aluminum substrate (Note 2)
Peak Forward Surge Current, 8.3 ms single half sine-wave
0.5
A
0.8
A
superimposed on rated load (JEDEC method)
30
A
Maximum Forward Voltage Drop per Bridge Element at 0.4A D.C.
1.0
V
Maximum DC Reverse Current
Ta=25 C
5.0
A
at Rated DC Blocking Voltage
Typical Thermal Resistance R JA (Note 3)
Operating Temperature Range, TJ
Storage Temperature Range, TSTG
Ta=125 C
500
A
75
C/W
-55 +150
C
-55 +150
C
NOTES: 1. On glass-epoxy P.C.B. mounted on 0.05 X 0.05"(1.27 X 1.27mm) soldering pads.
2. On aluminum substrate P.C.B. with an area of 0.8 X 0.8 X 0.25" (20 X 20 X 6.4mm) mounted on 0.05 X 0.05"(1.27 X 1.27mm)
soldering pads.
3. Thermal Resistance Junction to Ambient.
236