1N4001G Datasheet, PDF (1/2 Pages) NXP Semiconductors – Rectifiers(Rugged glass package, using a high temperature alloyed construction)

1N4001G THRU 1N4007G
1.0 AMP GLASS PASSIVATED RECTIFIERS
FEATURES
* Low forward voltage drop
* High current capability
* High reliability
* High surge current capability
* Glass passivated junction
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Lead: Axial leads, solderable per MIL-STD-202,
method 208 guranteed
* Polarity: Color band denotes cathode end
* Mounting position: Any
VOLTAGE RANGE
50 to 1000 Volts
CURRENT
1.0 Ampere
DO-41
.107(2.7)
.080(2.0)
DIA.
1.0(25.4)
MIN.
.205(5.2)
.166(4.2)
.034(.9)
.028(.7)
DIA.
1.0(25.4)
MIN.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
.375"(9.5mm) Lead Length at Ta=75 C
Peak Forward Surge Current, 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 1.0A
Maximum DC Reverse Current
Ta=25 C
at Rated DC Blocking Voltage
Ta=100 C
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance R JA (Note 2)
Operating and Storage Temperature Range TJ, TSTG
1N
4001G
50
35
50
1N
4002G
100
70
100
1N
4003G
200
140
200
1N
4004G
400
280
400
1N
4005G
600
420
600
1N
4006G
800
560
800
1N
4007G
UNITS
1000 V
700 V
1000 V
1.0
A
30
A
1.1
V
5.0
A
50
A
15
pF
50
C/W
-65 +150
C
NOTES:
1. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2. Thermal Resistance from Junction to Ambient .375" (9.5mm) lead length.
206