TVR10G Datasheet, PDF (1/2 Pages) Gulf Semiconductor – SINTERED GLASS JUNCTION FAST SWITCHING PLASTIC RECTIFIER VOLTAGE: 600V CURRENT: 1.0A

TVR10G
SINTERED GLASS JUNCTION
FAST SWITCHING PLASTIC RECTIFIER
VOLTAGE: 600V
CURRENT: 1.0A
FEATURE
High temperature metallurgically bonded construction
Sintered glass cavity free junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
350°C /10sec/0.375”lead length at 5 lbs tension
Operate at Ta =55°C with no thermal run away
Typical Ir<0.1µA
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
DO-41\DO-204AL
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
SYMBOL
TVR10G
Maximum Recurrent Peak Reverse Voltage
Vrrm
600
Maximum RMS Voltage
Vrms
420
Maximum DC blocking Voltage
Maximum Average Forward Rectified Current
3/8”lead length at Ta =55°C
Peak Forward Surge Current 8.3ms single half sine-
wave superimposed on rated load
Maximum Forward Voltage at rated Forward Current
and 25°C
Maximum full load reverse current full cycle average
at 55°C Ambient
Maximum DC Reverse Current
at rated DC blocking voltage
Ta =25°C
Ta =150°C
Maximum Reverse Recovery Time
(Note 1)
Vdc
If(av)
Ifsm
Vf
Ir(av)
Ir
Trr
600
1.0
30.0
1.3
100.0
5.0
100.0
150
Typical Junction Capacitance
(Note 2)
Cj
15.0
Typical Thermal Resistance
(Note 3) Rth(ja)
55.0
Storage and Operating Junction Temperature
Tstg, Tj
-65 to +175
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
units
V
V
V
A
A
V
µA
µA
nS
pF
°C /W
°C
Rev.A1
www.gulfsemi.com