SUF4001 Datasheet, PDF (1/2 Pages) Diotec Semiconductor – Ultrafast Switching Surface Mount Si-Rectifiers

SUF4001 THRU SUF4007
HIGH EFFICIENT
PLASTIC SILICON RECTIFIER
VOLTAGE:50 TO 1000V
CURRENT: 1.0A
FEATURE
Low power loss
High surge capability
Ultra-fast recovery time for high efficiency
High temperature soldering guaranteed
250°C/10sec/0.375”lead length at 5 lbs tension
DO -41\DO-204AL
MECHANICAL DATA
Terminal:Plated axial leads solderable per
MIL-STD 202E, method 208C
Case:Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity:color band denotes cathode
Mounting position:any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward Rectified
Current 3/8”lead length at Ta =55°C
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
Maximum Forward Voltage at Forward current
1A Peak
Maximum DC Reverse Current Ta =25°C
at rated DC blocking voltage Ta =100°C
Maximum Reverse Recovery Time (Note 1)
Typical Junction Capacitance
(Note 2)
Typical Thermal Resistance
(Note 3)
Storage and Operating Junction Temperature
SYMBOL SUF SUF SUF SUF SUF SUF SUF units
4001 4002 4003 4004 4005 4006 4007
Vrrm
50 100 _{200 400 600 800 1000} V
Vrms
35 70 _{140 280 420 560 700} V
Vdc
50 100 _{200 400 600 800 1000} V
If(av)
1.0
A
Ifsm
30.0
A
Vf
Ir
Trr
Cj
R(ja)
Tstg,Tj
1.0
1.4
1.7
10.0
100.0
50
75
15
12
50
60
-50 to +125
V
µA
µA
nS
pF
°C/W
°C
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
Rev.A4
www.gulfsemi.com