SS1Q Datasheet, PDF (1/2 Pages) Gulf Semiconductor – SINTERED GLASS JUNCTION SURFACE MOUNTED RECTIFIER VOLTAGE：1200V CURRENT： 1.0A

SS1Q
SINTERED GLASS JUNCTION
SURFACE MOUNTED RECTIFIER
VOLTAGE：1200V
CURRENT： 1.0A
FEATURE
For surface mounted application
High temperature metallurgic ally bonded
Sintered glass junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
450℃/10sec/at terminal／complete device
Submersible temperature of 265℃ for 10sec
GF1/ DO-214BA
MECHANICAL DATA
Terminal：Plated Terminal, solderable per
MIL-STD 202, method 208C
Case：Molded with UL-94 class V-0 recognized
Flame Retardant Epoxy over Glass
Polarity：color band denotes cathode end
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single—phase, half —wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated,
for capacitive load, derate current by 20％)
SYMBOL
SS1Q
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward Rectified
Current
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
Maximum Forward Voltage
at rated Forward current
Ta =25℃
Maximum full load reverse current
full cycle average at 75℃ ambient
Maximum DC Reverse Current Ta =25℃
at rated DC blocking voltage Ta =125℃
Typical Junction Capacitance
(Note 1)
Vrrm
Vrms
Vdc
If(av)
Ifsm
Vf
Ir(av)
Ir
Cj
1200
840
1200
1.0
30.0
1.2
30.0
5.0
50.0
15.0
Typical Thermal Resistance
(Note 2)
R(ja)
80.0
Operating and Storage Temperature Range
Tst, Tj
-65 to +175
Note：
1. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
2. Thermal Resistance from Junction to Ambient 6.0mm² copper pad to each terminal
Rev.A1
RATINGS AND CHARACTERISTIC CURVES SS1Q
units
V
V
V
A
A
V
μA
μA
μA
pF
℃/W
℃
www.gulfsemi.com