RU4C Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – FAST RECOVERY RECTIFIER

RU4C
GLASS PASSIVATED FAST SWITCHING
PLASTIC RECTIFIER
VOLTAGE: 1050V
CURRENT:3.0A
FEATURE
High temperature metallurgically bonded construction
Sintered glass cavity free junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
350°C /10sec/0.375”lead length at 5 lbs tension
Operate at Ta =55°C with no thermal run away
Typical Ir<0.2µA
Low power loss, high efficient
DO-201AD
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: Color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
SYMBOL
RU4C
units
Maximum Recurrent Peak Reverse Voltage
Vrrm
1050
V
Maximum RMS Voltage
Vrms
735
V
Maximum DC blocking Voltage
Vdc
1050
V
Maximum Average Forward Rectified
Current 3/8”lead length at Ta =35°C
If(av)
3.0
A
Peak Forward Surge Current 8.3ms single
Ifsm
half sine-wave superimposed on rated load
80
A
Maximum Forward Voltage at rated Forward
Vf
Current and 25°C
1.3
V
Maximum full load reverse current full cycle
average at 55°C Ambient
Maximum DC Reverse Current Ta =25°C
at rated DC blocking voltage
Ta =125°C
Ir(av)
Ir
100
µA
5.0
100
µA
Maximum Reverse Recovery Time (Note 1)
Trr
120
nS
Typical Junction Capacitance
(Note 2)
Cj
15
pF
Typical Thermal Resistance
(Note 3) Rth(ja)
50
°C
/W
Storage and Operating Temperature Range
Tstg, Tj
-55 to +150
°C
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
Rev.A1
www.gulfsemi.com