RU4AM Datasheet, PDF (1/2 Pages) Gulf Semiconductor – GLASS PASSIVATED FAST RECOVERY RECTIFIER VOLTAGE: 800V CURRENT:3.0A

RU4AM
GLASS PASSIVATED
FAST RECOVERY RECTIFIER
VOLTAGE: 800V
CURRENT:3.0A
FEATURE
High temperature metallurgically bonded construction
Sintered glass cavity free junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
350°C /10sec/0.375”lead length at 5 lbs tension
Operate at Ta =55°C with no thermal run away
Typical Ir<0.2µA
Low power loss, high efficient
DO-201AD
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: Color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
SYMBOL
RU4AM
Maximum Recurrent Peak Reverse Voltage
Vrrm
Maximum RMS Voltage
Vrms
Maximum DC blocking Voltage
Vdc
Maximum Average Forward Rectified
Current 3/8”lead length at Ta =35°C
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
Maximum Forward Voltage at IF=3.5A and 25°C
If(av)
Ifsm
Vf
Maximum full load reverse current full cycle
average at 55°C Ambient
Ir(av)
Maximum DC Reverse Current
at rated DC blocking voltage
Ta =25°C
Ir
Ta =125°C
Maximum Reverse Recovery Time
(Note 1)
Trr
Typical Junction Capacitance
(Note 2)
Cj
Typical Thermal Resistance
(Note 3) Rth(ja)
Storage and Operating Temperature Range
Tstg, Tj
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
800
560
800
3.0
80
1.2
100
5.0
100
120
15
50
-55 to +150
units
V
V
V
A
A
V
µA
µA
nS
pF
°C /W
°C
Rev.A1
www.gulfsemi.com