RU3JGF Datasheet, PDF (1/2 Pages) Gulf Semiconductor – SINTERED GLASS JUNCTION FAST SWITCHING PLASTIC RECTIFIER VOLTAGE:50 TO 1000V CURRENT: 1.5A

RU3JGF
SINTERED GLASS JUNCTION
FAST SWITCHING PLASTIC RECTIFIER
VOLTAGE:50 TO 1000V
CURRENT: 1.5A
FEATURE
High temperature metallurgically bonded construction
Sintered glass cavity free junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
350°C /10sec/0.375”lead length at 5 lbs tension
Operate at Ta =55°C with no thermal run away
Typical Ir<0.2µA
Low power loss, high efficient
DO-15
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E,method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
SYMBOL
RU3JGF
Maximum Recurrent Peak Reverse Voltage
Vrrm
600
Maximum RMS Voltage
Vrms
420
Maximum DC blocking Voltage
Vdc
600
Maximum Average Forward Rectified
If(av)
1.5
Current 3/8”lead length at Ta =55°C
Peak Forward Surge Current 8.3ms single
Ifsm
50
half sine-wave superimposed on rated load
Maximum Forward Voltage at rated Forward
Current and 25°C
Vf
1.1
Maximum DC Reverse Current Ta =25°C
Ir
10
at rated DC blocking voltage Ta =125°C
100
Typical Reverse Recovery Time (Note 1)
Trr
75
Typical Junction Capacitance
(Note 2)
Cj
50
Typical Thermal Resistance
(Note 3)
Rθja
20
Storage and Operating Temperature Range
Tstg, Tj
-65 to +175
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
units
V
V
V
A
A
V
µA
µA
nS
pF
°C /W
°C
Rev.A4
www.gulfsemi.com