RG10GGF Datasheet, PDF (1/2 Pages) Gulf Semiconductor – SINTERED GLASS JUNCTION FAST SWITCHING PLASTIC RECTIFIER VOLTAGE: 400 V CURRENT: 1.2A

RG10GGF
SINTERED GLASS JUNCTION
FAST SWITCHING PLASTIC RECTIFIER
VOLTAGE: 400 V
CURRENT: 1.2A
FEATURE
High temperature metallurgic ally bonded construction
Sintered glass cavity free junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
350°C /10sec/0.375”lead length at 5 lbs tension
Operate at Ta =60°C with no thermal run away
Typical Ir<0.2µA
Low power loss, high efficient
DO-15
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
SYMBOL
RG10GGF
Maximum Recurrent Peak Reverse Voltage
Vrrm
400
Maximum RMS Voltage
Vrms
280
Maximum DC blocking Voltage
Vdc
400
Maximum Average Forward Rectified
If(av)
1.2
Current 3/8”lead length at Ta =60°C
Peak Forward Surge Current 8.3ms single
Ifsm
50
half sine-wave superimposed on rated load
Maximum Forward Voltage at IF=1.5A and 25°C
Vf
1.2
Maximum DC Reverse Current Ta =25°C
at rated DC blocking voltage Ta =125°C
Maximum Reverse Recovery Time (Note 1)
Typical Junction Capacitance
(Note 2)
Typical Thermal Resistance
(Note 3)
Storage and Operating Temperature Range
Ir
Trr
Cj
R(ja)
Tstg, Tj
10
100
50
33
20
-65 to +175
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
Rev.4, 1
units
V
V
V
A
A
V
µA
µA
nS
pF
°C /W
°C
www.gulfsemi.com