P600A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – HIGH CURRENT PLASTIC SILICON RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 6.0 Amperes)

P600A THRU P600M
GENERAL PURPOSE
PLASTIC RECTIFIER
VOLTAGE:50 TO 1000V
CURRENT: 6.0A
FEATURE
Molded case feature for auto insertion
High current capability
Low leakage current
High surge capability
High temperature soldering guaranteed
250°C/10sec/0.375”lead length at 5 lbs tension
P600\R-6
MECHANICAL DATA
Terminal:Plated axial leads solderable per
MIL-STD 202E, method 208C
Case:Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity:color band denotes cathode
Mounting position:any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBO
L
P600A
P600B
P600D
P600G
P600J
P600K
P600M
units
* Maximum Recurrent Peak Reverse Voltage
Vrrm
50
* Maximum RMS Voltage
Vrms 35
* Maximum DC blocking Voltage
Vdc
50
Maximum Average Forward Rectified
Current 3/8”lead length at Ta =63°C
Peak Forward Surge Current 8.3ms single
Half sine-wave superimposed on rated load
Maximum Instantaneous Forward Voltage at
rated forward current
Maximum full load reverse current
full cycle at T_L =75°C
Maximum DC Reverse Current Ta =25°C
at rated DC blocking voltage Ta =100°C
If(av)
Ifsm
Vf
Ir(av)
Ir
Typical Junction Capacitance
(Note 1)
Cj
Typical Thermal Resistance
(Note 2)
R(ja)
Storage and Operation Junction Temperature Tstg
100 _{200 400 600 800 1000} V
70
140 280 420 560 700
V
100 _{200 400 600 800 1000} V
6.0
A
400.0
A
1.1
V
50.0
µA
10.0
µA
100.0
µA
150.0
pF
10.0
°C/W
-50 to +175
°C
Note:
1. Measured at 1.0 MHz and applied voltage of 4.0Vdc
2. Thermal Resistance from Junction to Ambient at 0.375”lead length, P.C. Board Mounted¹
1 _Rev.4
www.gulfsemi.com